I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
REC Components
ReelSeatBlanks.com
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
Rodgeeks
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast


Pages: 12Next
Current Page: 1 of 2
Results 1 - 30 of 59
5 months ago
Mark Warnke
Are Bushido Fly Blanks no longer available?
Forum: rodboard
10 months ago
Mark Warnke
One thing to remember for either pumps or syringes is that if you don't use them for a while they may skim over in the uptake tube. Usually the resin seems to skim over more. This will cause the opening to be smaller, seems to affect the pumps more often, but something to watch for in both methods. Especially if your rod shop is cool in temp and the resin gets thick anyways. Mark
Forum: rodboard
1 year ago
Mark Warnke
I just did a search for that motor on amazon. nothing...anything more specific would be appreciated. Also info on the control center. Please. thanks
Forum: rodboard
1 year ago
Mark Warnke
Gabe, got the new threads out today and am pleased! looking forward to wrapping my first rod with them. The new swivels look slick. Can't wait to test them also! Thanks!
Forum: rodboard
1 year ago
Mark Warnke
Metallics Too!!! Awesome!! I cant wait for my next order to get here...Thanks Gabe!
Forum: rodboard
2 years ago
Mark Warnke
Just one week away!!!!
Forum: rodboard
2 years ago
Mark Warnke
Ohio Rod Builders Gathering?????Northeast Ohio????Anybody know Anything?
Forum: rodboard
2 years ago
Mark Warnke
Wooo Hooo! I'll be there!
Forum: rodboard
3 years ago
Mark Warnke
Would there be any chance of letting a buckeye join in on the fun????
Forum: rodboard
3 years ago
Mark Warnke
Nobody???
Forum: rodboard
3 years ago
Mark Warnke
Just wondering if any other ohio rod builders know what the NAICS code for rod building is? i'm thinking 423910. WHOLESALE TRADE/ Sporting Recreational Goods
Forum: rodboard
3 years ago
Mark Warnke
Awesome! Thanks for the help. Actually my next question was going to be about the difference of the height between the single and the double foot guides. Thanks Spencer! all in all I was asking so I knew when a customer asked which was better, I knew what the answer was.. you guys are great! Thanks again!
Forum: rodboard
3 years ago
Mark Warnke
Hey guys, What are the advantages and disadvantages of using a single foot or double foot stripping guides on a fly rod? is one better than the other? Thanks!
Forum: rodboard
3 years ago
Mark Warnke
Oh by the way, thanks John. that post was very informative.
Forum: rodboard
3 years ago
Mark Warnke
and here's the next step up. Has any one who has used the MHX also used the st Croix? Not asking too much am I?
Forum: rodboard
3 years ago
Mark Warnke
here is the closest I could find so far. I think someone mentioned this rod somewhere????......
Forum: rodboard
3 years ago
Mark Warnke
Ok. so this is what I had my hands on today and it felt very good. The tip felt right, the backbone was just right. I was wanting to find something in the MHX line. anyone know off hand. i'm looking now. thanks.
Forum: rodboard
3 years ago
Mark Warnke
Hey guys I need some help. I have a guy that wants a Perch (yellow- lake erie) rod to use on his boat, fishing in 40 ft of water. He requests that if have a sensitive tip to feel the lite perch bite, yet have a stiff enough back bone that its snappy enough to not miss the bite since he's fishing so deep. Also he wants it to be 2 pc. and 6 or 6 1/2 ft. His rods now work great for 1
Forum: rodboard
3 years ago
Mark Warnke
YEP!!! That's me.
Forum: rodboard
3 years ago
Mark Warnke
If I have a gloss finish blank but want it to be a matte finish, would there be any problem using a scotch bright pad and de-glossing it?
Forum: rodboard
3 years ago
Mark Warnke
Hey , I was wondering where the best place online was to buy plastic syringes?
Forum: rodboard
3 years ago
Mark Warnke
A BIG thanks to all! I would like to say THANK YOU to all at the gathering! I had a great time, felt right at home, and learned some new tricks as well. The wealth of knowledge available was unbelievable. I to enjoyed the pyrography demo and will be looking to get into that aspect of this obsession. I am already looking forward to next year. Also, if there is interest in putting together a
Forum: rodboard
3 years ago
Mark Warnke
WooooHoooooo!!!!! I gitta Goooooooo!!!!!!
Forum: rodboard
3 years ago
Mark Warnke
Does my wife need to be included on the list if she is coming with me?
Forum: rodboard
3 years ago
Mark Warnke
I keep getting this when I try to email Joe. ----- The following addresses had permanent fatal errors ----- <[email protected]> (reason: 554 delivery error: dd This user doesn't have a yahoo.com account ([email protected]) [0] - mta1168.mail.bf1.yahoo.com) I want to sign up for the gathering. Please.
Forum: rodboard
3 years ago
Mark Warnke
I have the 270 and have noticed the same thing. At first I thought maybe I touched the back side some how, but since I've been using transfer tape, it has eliminated that possibility.
Forum: rodboard
4 years ago
Mark Warnke
I think I can! I think I can! I hope I can!!
Forum: rodboard
4 years ago
Mark Warnke
I have used it once so far. will be doing #2 & #3 today. The first one worked quite well....it stayed gripped to the mandrel while turning, then removed relatively easily with a little bit of persuasion. I am using titebond 3 . I was worried the wax might allow it to break free from the mandrel easily.
Forum: rodboard
4 years ago
Mark Warnke
Is there any reason basic candle wax cannot be used as a release agent on a mandrel to get a completed grip off of it? Thanks
Forum: rodboard
4 years ago
Mark Warnke
Thanks for the info Tom. Thanks to everyone who helped out. I have decided to start over...heck I can fix the little things I didn't like about my first handle.
Forum: rodboard
Pages: 12Next
Current Page: 1 of 2

Webmaster