SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 45
5 years ago
David Barrett
I used pigment instead of the powder. Now it is not drying. What can I do to fix it? Can I apply a light coat of epoxy again? Do I need to start all over? This is the last step for me before it is finished. I read the past posts and I see powder is used. I am looking for a remedy for my situation to save this rod.
Forum: rodboard 8 years ago
David Barrett
Thanks everyone. I was unsure if there was a fix. On to replacing it now
Forum: rodboard 8 years ago
David Barrett
I have just been brought a rod guide and the inside ring. They are both metal (not a plastic insert). Is there a way I can fix the metal insert without taking off the guide and replacing the whole guide?
Forum: rodboard 9 years ago
David Barrett
thanks for every ones advice. I learned alot
Again, thanks
Forum: rodboard 9 years ago
David Barrett
Bill,
This was an old rod of mine I was using to practice on. When do you use a metal ferrule and when do you use an oversleeve? Where do you find an oversleeve, from a scrap blank?
Thanks guys... still learning
Dave
Forum: rodboard 9 years ago
David Barrett
This is my first attempt and fixing a broken blank. I have read the section in Tom's book and searched the internet.
The rod is broken about 10 Inches from the tip I measured the blank and it is 3.09 at the beak ( butt end) and I bought the smallest ferrule I could find. I have it glued together but my question is how to wrap it? From the blank to the lip of the ferrule seems like a large ju
Forum: rodboard 9 years ago
David Barrett
I am using a lite coat epoxy with several applications and am having trouble getting it to dry. I have had it drying for 4 days. Currently , I have it in front of a glass enclosed gas fireplace for periods of time (1 hour) at a time.
What can I do to speed the process or can it be fixed? I have a heat gun but there are decals in the area which would be ruined
Any ideas?
Forum: rodboard 9 years ago
David Barrett
Hey guys,
yes as I admitted up front I must of made a mistake Thanks for all the suggestions and your time. I will start again and have learned from my mistake
Thanks again
Forum: rodboard 9 years ago
David Barrett
Thanks guys,
I used marbling pigment CRB from mudhole.
I did not mix any epoxy in it. I did not have anything on the rod blank either.
I know I did something wrong
Forum: rodboard 9 years ago
David Barrett
12. Paint not drying
I have looked at the forum history files but can not find the answer to my problem I have a rod I did some marbling on about two weeks ago and it is still not dry. It has been turning that long
I have used my heat gun and placed it in a room over 80 degrees for a couple of days. It is still not dry.
I used the paint from one of the suppliers on the left ( not the powdered paint ) and bru
Forum: rodboard 9 years ago
David Barrett
Thanks Jimmy That was the problem I am sure. I will be more careful with the 2nd and 3rd coats
Forum: rodboard 9 years ago
David Barrett
Thanks everyone for your advice. One more question. I was in the hardware store and picked up a can of Ultra Cover Clear Gloss Rust-Oleum. Not sure I want to use it but looking to see if I should give it a try as a final coat.Remember, I messed up and placed the guides on a blank I painted with krylon.
Will this work or just make it worse?
Forum: rodboard 9 years ago
David Barrett
Thanks guys, I am going to repaint using the thread finish and a drop or color Will that work?
Forum: rodboard 9 years ago
David Barrett
16. Paint chiping
Instead of going to the auto body shop, I used Krylon on a graphite rod. I have three coats on and it is chipping. What did I do wrong? I did not place a finish like spar finish for a final coat.
Any suggestions will be of help I just finished wrapping the guides and if there are any suggestions besides pulling them off I would appreciate your comments
Thanks
Forum: rodboard 9 years ago
David Barrett
17. Re: Close Call
I use a lighter that has a long stem and small flame. It is one of those lighters you start a fire in the fireplace. Press the trigger and it lights release and it goes out
Forum: rodboard 9 years ago
David Barrett
I am making a walleye spinning rod for my 30 yr old nephew. He would like have a red rod. I searched high and low for some pictures for ideas. I am looking for some advice on thread color, reel seat and butt handles. I would like to turn a wood handle for him but am open to any ideas
Forum: rodboard 9 years ago
David Barrett
20. Re: New Issue
Hi tom,
i just subscribed. Will I be receiving this issue?
Forum: rodboard 9 years ago
David Barrett
Guys,
I really appreciate all of the comments. Every time I post a question ( new rod builder) I am so impressed by the board's comments. They are so helpful. I have been on other boards ( fishing reports) and they are nothing but people complaining about other posters. Thanks for you professionalism.
This has been very helpful
Forum: rodboard 9 years ago
David Barrett
Thanks guys. Any idea how long the finish will last with moderate use? A couple of time per year
Forum: rodboard 9 years ago
David Barrett
I looked in the library and did a search but did not see an answer to my question. I have turned my first wood handle. I used clear wood turners finish after sanding. Should i leave it as is or put another finish on e.g. polyurethane? Any recommendations would be most appreciated
Forum: rodboard 10 years ago
David Barrett
24. First Rod Repair
I have my first rod repair and have a few questions. The guide is broken. What is the best way to try to match a guide? I know it is a basic question and most of you are getting a good chuckle now but I would like to do a good job. The guide is a single foot and looks to be silver in color. I tried looking at Mudhole and other vendors. How do I know for sure what guide it could be.
Thanks
Forum: rodboard 10 years ago
David Barrett
First time I am building a rod with a fighting butt cap and have a question I have a preformed cork butt cap and the opening is large compared to the end of the rod blank. I used some masking tape to fill up the gap. I know enough to insert something inside the blank to cause a blockage for the epoxy to fill.
Is there a better way? I have searched the files here and the internet.
Than
Forum: rodboard 10 years ago
David Barrett
26. Re: Skype
Roger, How long have you been in business? I am just starting out and would like to learn some best practices.
Forum: rodboard 10 years ago
David Barrett
i really want to understand the learning curve here. I just started trying to build rods. How long have you been doing this? I THINK i understand the math, but that is about it
Forum: rodboard 10 years ago
David Barrett
28. Marbling help
Hi , I am looking for a good tutorial on the marbling technique. I have seen some great pictires. I have done a couple. Just a newbie looking for help to make a better product
Forum: rodboard 10 years ago
David Barrett
29. Re: Rod paint
From this forum it was suggested to go to an auto body shop I paid 35.00 per rod and the look great. I was able to pick out some awesome colors.
I just hope I do not mess them up
Forum: rodboard 10 years ago
David Barrett
Thanks guys. I did manage to save the seat and the blank.
Forum: rodboard |