SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 25 of 25
5 years ago
John Allgood
When fishing from a kayak, rod length has never really been a problem for me, but HANDLE length has. In a kayak you need a little shorter handle on your rod to keep the handle from hitting you in the stomach and taking away mobility. I normally use 7 inch handles in the kayak on 7 ft. rod lengths for whatever action I choose. Although I usually have two rods in the kayak, you can only use one
Forum: rodboard 5 years ago
John Allgood
I am also a spoon plugger and also use much shorter and stiffer trolling rods. The short stiff rods work well for me. The writings of Buck Perry and Don Dickson are very informative.
I also have never used a trolling rod anything like what is being described so have no advice there.
Forum: rodboard 6 years ago
John Allgood
Curious about the same blanks. As he said, in the catalog but not on the website.
Forum: rodboard 6 years ago
John Allgood
Something I haven't seen mentioned in the thread. When I started to fish out of kayaks, long handle rods stuck me in the gut. Sitting in a kayak, a 7" to 9" handle works well.
It all depends on how the rod is to be used.
Forum: rodboard 7 years ago
John Allgood
When fishing out of a kayak, a shorter handle works better. 7 to 9 inches works well.
John
Forum: rodboard 7 years ago
John Allgood
I agree with Norm for reasons to use a leader with braid. I have been using braid exclusively since 1995. I fish soft plastics a lot and the 'feel and sensitivity' achieved with braid is amazing. BUT when I first started using braid, I experienced line breaks while fighting fish with no leader. When I started using a leader, the line breaks stopped.
With braid, when you run the line betw
Forum: rodboard 7 years ago
John Allgood
Tom Kirkman Wrote:
-------------------------------------------------------
> I'm not aware of any real downside to spiral
> wrapped rods, other than the necessity of having
> to educate some customers on the mechanics
> involved. I supposed there could be some fishing
> techniques or applications where it might not be
> appropriate, but in general, guides belong on the
&
Forum: rodboard 7 years ago
John Allgood
After 5 years you are smart to take what was offered.
Sorry your rod failed but at least you are getting SOMETHING.
Forum: rodboard 7 years ago
John Allgood
After 5 years you are smart to take what was offered.
Sorry your rod failed but at least you are getting SOMETHING.
Forum: rodboard 7 years ago
John Allgood
After 5 years you are smart to take what was offered.
Sorry your rod failed but at least you are getting SOMETHING.
Forum: rodboard 7 years ago
John Allgood
Frank Matthews Wrote:
-------------------------------------------------------
> I recently ran across this rod
> whereby
> it is stated that the rod is a hybrid and can be
> used as a spinning or casting rod. I'm a little
> perplexed since it is my understanding that the
> guides should be placed on the "belly" of the
> spine of a spinning rod and on the &q
Forum: rodboard 8 years ago
John Allgood
Jean Scurtu Wrote:
-------------------------------------------------------
> The best knot is crazy ALBERTO "knot :
>
>
> e=player_embedded&noredirect=1
I have to agree with Jean also. The Crazy Alberto knot is strong, extremely reliable and passes through even micro guides easier than any of the other knots I have tied.
The knot was developed by Alberto Nie
Forum: rodboard 8 years ago
John Allgood
David Baylor Wrote:
-------------------------------------------------------
> But when it comes to searching for a rod blank,
> it's ..... well, let's just say I think it's junk.
> They've taken something that was simple and worked
> very well, and IMO made a mess of it. A filtered
> search is a nice option, but it should be just
> that ....... an option, and not a requir
Forum: rodboard 8 years ago
John Allgood
Small guide size does nothing to eliminate torque when they are placed on the top of the rod. Even though the guides are smaller, they still want to move to the bottom of the rod. That problem is only eliminated by placing the guides (small or large) on the bottom or under side of the rod. Torque increases with load (fish size). If a 5 pound fish is large for you, then torque is minimal. If
Forum: rodboard 8 years ago
John Allgood
I have never seen a grooved ceramic ring either.
John Allgood
Forum: rodboard 8 years ago
John Allgood
When in doubt on color of accent bands of any lighter color thread, black will often work when others don't really satisfy you.
Forum: rodboard 8 years ago
John Allgood
Bob Veasey Wrote:
-------------------------------------------------------
> I would add before I would cut....bob v
I agree with this, I would add before I would cut, but two inches is a pretty small percentage of that length to add. Any perceived improvement would also add weight to the blank and slightly alter the action, usually not for the better. I would leave the length of the bla
Forum: rodboard 8 years ago
John Allgood
For the majority of my fishing I use 30 lb test braid joined to a 5 to 7 foot fluorocarbon leader with a Crazy Alberto Knot. Conserves the braid, fluoro breaks first, very small knot that goes through even micro guides quite well. Definitely a smaller knot than the uni to uni. Uni to uni works and is a reliable connection between braid and fluoro, but Crazy Alberterto is definitely a smaller k
Forum: rodboard
Current Page: 1 of 1
|