SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 88
2 years ago
gabriele schieda
1. Nfc Rods
I wanted to share something positive, anytime I need to contact Nfc Steve pitcock is always there to help me. I respect and admire his customer service. Have to appreciate good people and thought I would share that with you. Have a great day everyone.
Forum: rodboard 2 years ago
gabriele schieda
Live dealing with Voodoo, amazing customer service and good prices. Casey is a champ
Forum: rodboard 2 years ago
gabriele schieda
If it's the same blank it can be different stiffness. Same model
Forum: rodboard 2 years ago
gabriele schieda
Tom Kirkman Wrote:
-------------------------------------------------------
> Ferrule fit is only one problem you may have with
> this type section replacement.
>
> .........
Fits really good not sure what you mean, the original I am thinking that is why it broke in that area. It was only in 1.25 inch's. It broke around there, I have three Hm blanks, they all were 2.5 inch.
Forum: rodboard 2 years ago
gabriele schieda
I have a few NFC Hm blanks, I broke one and I want to use the midsection of the other blanks I have. What should be the ferrule measurements. I measured with the new one it seems to go a quarter inch more than the broken one. Is that ok. Cause it's a mid section I have to account for tip and butt. I have 2 3/4 for the butt and 2 1/4 for the tip. That's the amount that goes in. Thanks in Advance
Forum: rodboard 2 years ago
gabriele schieda
I use a lighter and heat while pulling never had a problem. I use a drill bit to clean out the epoxy out of the tube.
Forum: rodboard 2 years ago
gabriele schieda
I use the u-40 cp I like it alot, I use to use the gudebrod orginal formula, stuff was the best Imo. Not sure why they changed the formula, I use cp for my normal nylon. I find it has to be less than a year old or it leaves alot of blotches. People had told me it's from the threads not being pack tight enough but it wasn't the case for me. I put three thin coats works great and haven't had it giv
Forum: rodboard 2 years ago
gabriele schieda
10. Re: Guide size
Thank bud for your info appreciate it
Forum: rodboard 2 years ago
gabriele schieda
13. Guide size
Hi Everyone I had a question Batson size 16 has been back ordered for 2 months anyone ever do 20 to 12 for a float rod. Thanks in advance
Forum: rodboard 2 years ago
gabriele schieda
I didn't purchase this guide I got a few off some friend that got them from a Rapala Concept Ti. I usually wrap float fishing rods, not a newbie. Just trying to see if anyone has any good transition ideas. I am building a bass rod for the first time, 90% I use guide tops on float rods
Forum: rodboard 2 years ago
gabriele schieda
17. Fuji MN tip top
Hi everyone, anyone have any ideas on how to tie this tip top on. The step is very high. Was thing of wrapping a thread underneath. Thanks in advance
Forum: rodboard 3 years ago
gabriele schieda
18. Re: Nfc blank
Anyone build the SJ it looks like more power?
Forum: rodboard 4 years ago
gabriele schieda
20. Nfc blank
Looking to order Nfc blank for pitching and flipping grass. I like the sounds of the x-ray blank. 1/2 to 3/4 jigs. Deep weedline fishing tournaments. Any suggestions on which blank. thank you in advance.
Forum: rodboard 8 years ago
gabriele schieda
Anyone have the weights, are the k frames lighter then the y frame
Forum: rodboard 8 years ago
gabriele schieda
I find that I applying a bit thicker and use a little heat on the wrap and it thins out Nicely
Forum: rodboard 8 years ago
gabriele schieda
24. Re: Slip clutch
Just for finish I plan to use it for.
Forum: rodboard 8 years ago
gabriele schieda
I agree with bill I do the decal on its own. I do lengthwise strokes. I do the 180 on the decal for 15 mins just to make sure there's no heavier spots. Then I put it on a 9 rpm dryer.
Forum: rodboard 8 years ago
gabriele schieda
I agree with bill I do the decal on its own. I do lengthwise strokes. I do the 180 on the decal for 15 mins just to make sure there's no heavier spots. Then I put it on a 9 rpm dryer.
Forum: rodboard 8 years ago
gabriele schieda
I agree with bill I do the decal on its own. I do lengthwise strokes. I do the 180 on the decal for 15 mins just to make sure there's no heavier spots. Then I put it on a 9 rpm dryer.
Forum: rodboard 8 years ago
gabriele schieda
I only heat my epoxy when I see the white crystals in the bottles. I just mix and apply.
Forum: rodboard 8 years ago
gabriele schieda
I find that I need three coats, after the second coat I find that the threads at the edges are not fully covered. I use pro kote med build.
Forum: rodboard |