SPONSORS
2024 ICRBE EXPO |
Guide spacing on Low rider guides
Posted by:
Tony Politi
(---.dyn.optonline.net)
Date: February 05, 2002 11:03PM
Is there any reference to guide spacings/guide size on 10'& 11' surf blanks. Such as lamiglas GSB 108 1L, GSB 108 1M, or GSB 120 1M. Thanks Re: Guide spacing on Low rider guides
Posted by:
Tom Kirkman
(---.dialsprint.net)
Date: February 06, 2002 05:17PM
Tony,
I have not used these guides. Still, guide spacing would likely be similar - you want to use enough and space them so as to keep the line off the blank under load. Where you locate your reel and which type rod you build, spinning or casting, will have much to do with where they should go. A standard guild placement chart for rods of length might give you a good starting point but I think you will want to fine tune the placement through a static distribution test. .............. Sorry, only registered users may post in this forum.
|