I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Rod Crafters Journal
Posted by: Rick Warren (---.wcnet.org)
Date: October 03, 2003 06:46PM

I got these Rod Crafters Journal magazines when I purchased a Renzetti Lathe and an assortment of rod building supplies from a gentleman in the Detriot, Mi. area. They are from March 1975 to Dec.
1986. There are about 75 or 80 issues. Are they of any value ?
Also I am looking for Dale Clemens weaving tool that is used in the
Decorative Rod Wrapping Volume 2 Video by Artie Herbert.
I can not seem to locate one on the internet.

Options: ReplyQuote
Re: Rod Crafters Journal
Posted by: Ed Sabatini (---.proxy.aol.com)
Date: October 03, 2003 08:19PM

No particular value other than reading pleasure. Not always accurate from a technical standpoint but tips and articles from rod builders in general. Some good tips and ideas. I believe they are still publishing in some form but infrequently.

Options: ReplyQuote
Re: Rod Crafters Journal
Posted by: Henry Curtis (216.40.249.---)
Date: October 03, 2003 09:03PM

Good little booklets. But as Ed said do not bank too heavily on anything of a technical nature you see in them. The ideas and tips are fine. Back issues are still selling for about 2 bucks apiece so I don't think you have anything very valuable unless you have some older copies that they're out of and someone might want. Put them up on @#$%& and see what they bring if you want to try and sell them.

Options: ReplyQuote
Re: Rod Crafters Journal
Posted by: Dennis J. Danku (---.proxy.aol.com)
Date: October 04, 2003 11:42AM

Rick, Check Mud Hole for the weaving tool. Dennis

Options: ReplyQuote
Re: Rod Crafters Journal
Posted by: Wes Woods (---.hsd1.mi.comcast.net)
Date: February 07, 2017 08:41PM

Hey Rick do you still have these?

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster