Steelhead rod blank

Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.
Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.
Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

Steelhead rod blank

Posted by: Joe H. (---.dialup.mindspring.com)

Date: December 08, 2001 04:46AM

I am trying to find a blank in the 10 foot range in either a truly fast action or med/mag taper for throwing spoons and drifting. Thus far I am only aware of two specimens that fill my needs. One is Cabela's XML GST 1004 and Lamiglas' Cert. Pro X 10 MTC, the second of which is not offered in blank form to my knowledge. Does anyone have info on other options in this length? I might ad that a tip size in the 4.5 to 5.5 is desireable as cast weight will be 3/8-1 oz. primarily. The only problem I have encountered with the XML is that it is a little soft and the GST 1006 is a tad stout. In the last couple years I have built quite a few rods in the 9 to 10.5 foot range and have yet to find the magic wand. Also I have been experimenting with smaller ring single foot guides on the the tip section in order to keep weight down and allow for optimum sensitivity and action. ( By the way this is a casting rod). Any input would be greatly appreciated.

Options: Reply•Quote