I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2025 ICRBE
Custom Rod Symbol
Common Cents System
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Century Rods
Custom Fly Grips LLC
Decal Connection
EPSON Decal Printers
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Note From Flex Coat
Posted by: Roger Seiders (Moderator)
Date: October 28, 2024 03:08PM

This is to let everyone know that all of our DC wrapping and finishing motors are back in stock.

Our inventory now includes a NEW variable speed motor with a speed range of 8 to 100 RPM (Stock # VSMS), perfect for both applying and curing finishes efficiently.

Additionally, the original variable speed finishing motor (Stock # VSM) with a speed range of 40 to 200 RPM is available for those requiring a faster application.

The Flex Coat 40 to 600 RPM dual control motor with foot control (Stock # UMDX) is also available, compatible with our power wrapping, guide alignment, and finishing machine (Stock # DX 777).

Each motor comes fully wired, complete with a plug, on a new thicker aluminum stand where the height can be adjusted up or down between 5 ¼ inches to 7 3/8 inches, and the Flex Coat slip clutch chuck.

These products can be purchased through Flex Coat dealers or directly at www.flexcoat.com

[flexcoat.com]

[flexcoat.com]

Flex Coat Company
Professional Rod Building Supplies
www.flexcoat.com



Edited 1 time(s). Last edit at 10/28/2024 03:15PM by Roger Seiders.

Sorry, only registered users may post in this forum.
Webmaster