I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2025 ICRBE
Custom Rod Symbol
Common Cents System
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Century Rods
Custom Fly Grips LLC
Decal Connection
EPSON Decal Printers
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Guide Alignment
Posted by: Tom Kirkman (Moderator)
Date: October 19, 2024 10:34AM

For eons the topic of how to perfectly align guides remains unsolved. Eyeballing still seems to be the best way for most, and it's not perfect. Now there is a DIY tool that allows you get perfectly aligned guides in seconds. An article on the tool will appear in the Volume 27 #6 issue of RodMaker. Several of us worked with it this morning and you can dial in guide alignment to perfect, even on crooked rod blanks. The issue will be out around Christmas time.

...................



Edited 1 time(s). Last edit at 10/19/2024 10:35AM by Tom Kirkman.

Options: ReplyQuote
Re: Guide Alignment
Posted by: Jeremy Moore (---)
Date: October 19, 2024 11:32AM

Awesome. Thanks Kirk.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster