Hi All,

I’m preparing to build some bass rods based on my well worn Loomis SJRs. I have secured the blanks from NFC classic series. I was tryin to locate any info anyone someone might have about the details of these reel seats. I have read up on the sticks and bones style seat that is a close match and ordered the magazine with the details. I would however like to be as close as possible in my reproductions. Does anyone have any pictures of the rear ring of these seats they might be able to share ? Or in a long shot I was considering putting up an add if someone might have some they would part with. I’ve scowered the net with not much luck. Thanks !

Brian, your email is hidden, unhide it and I'll send you pics and info. In essence the casting and spinning are identical except for the trigger, you could cut off the trigger and have a spinning seat, the parts are solid material, nothing hollow in the rear part of the seat behind the cork/wood/eva center piece, Angler's Workshop still has some of the cork center sections in the 16 mm threaded nut size.



Edited 1 time(s). Last edit at 10/17/2024 04:55PM by Spencer Phipps.

Spencer Phipps Wrote:
-------------------------------------------------------
> Brian, your email is hidden, unhide it and I'll
> send you pics and info. In essence the casting and
> spinning are identical except for the trigger, you
> could cut off the trigger and have a spinning
> seat, the parts are solid material, nothing hollow
> in the rear part of the seat behind the
> cork/wood/eva center piece, Angler's Workshop
> still has some of the cork center sections in the
> 16 mm threaded nut size.


Hi Spencer thanks for the info. I’ll check into the lead on cork. I believe I unlocked my email correctly. Thanks again !