I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2025 ICRBE
Custom Rod Symbol
Common Cents System
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Century Rods
Custom Fly Grips LLC
Decal Connection
EPSON Decal Printers
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Pages: Previous12345
Current Page: 5 of 5
Last Chance to Save 20% Sitewide on Orders Over $200 - Ends Today! Use Code: FishHelene
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:38PM


Save 20% Sitewide Ends Today!
Orders over $200. Code: FishHelene

Build What u want for Less! All your favorite brands.

Options: ReplyQuote
Open Discussion: Share your thoughts, experiences, or ask any questions
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:38PM


Options: ReplyQuote
Complete Builder Kits with Top-Level Components from TheFlySpokeShop.com - One Stop Shopping Experience!
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:38PM


One Stop Shopping. We can create a builder kit with all the highest level components required. CTS - Fuji - American Tackle - ALPS - Snake Brand - REC - FlySpoke Grips & Burl Seats. TheFlySpokeShop.com [TheFlySpokeShop.com]

Options: ReplyQuote
Need Advice: Fixing Loose EVA Grip on Newly Built Rod Due to Insufficient Epoxy
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:39PM

Hey guys I recently just built a rod with EVA grips and the top of the for grip seems like it didnt get enough epoxy and is twisting a bit whats the best way to fix this?

Options: ReplyQuote
Seeking Substitutes for Discontinued MOJO Bass Style Rod for Wacky Worm Fishing - Suggestions for 7'2 Med Heavy Fast Action?
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:39PM

I have someone who wants a discontinued MOJO bass style rod for wacky worm fishing, what is the closest to sensitivity and action. He would like a 7'2" med heavy fast action [rodgeeks.com]

Options: ReplyQuote
Greetings and Introductions: Say Hello!
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:39PM

Hello

Options: ReplyQuote
Seeking Opinions and Encouragement on Building a Two-Piece Fishing Rod (Rainshadow IP844F)
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:39PM

Whats the general consensus of two piece rods? I ordered a blank and didnt realize its a two piece (rainshadow IP844F). I guess what im looking for is someone to convince me to build this thing lol.

Options: ReplyQuote
Seeking Recommendations for Building NFC Blank Set for Bass Fishing
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:39PM

For those of you that have built on NFC blanks! Im looking to build a set for Bass! Which ones are recommended for Worm, Flipping,Frog,Jerkait,Crankbait Spinnerbait, Dropshot, Swimjig and Chatterbait rod! Or maybe something else Im missing! Thanks for any help!

Options: ReplyQuote
Request: Seeking Information on Coors Light Can Used in Rod Butt Wrap - Need Direction
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:39PM

I saw someone used a coors light can near the butt wrap on a rod. I can't remeber what group it was in. Does anyone remeber this if so can you point me in that direction. TY in advance.

Options: ReplyQuote
Seeking Advice on Upgrading Thread Carriage for Pacbay Power Wrapper - Frequent Thread Snapping Issue
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:39PM

Hey you mob,

I have a Pacbay power wrapper and want to upgrade my thread carriage.

Whats the best to go for? Sick of the thread snapping this is not from being over tightened as the wing nuts constantly undoes as Im using it

Any help would be greatly appreciated.

Thanks you mob

Options: ReplyQuote
New Builder Seeking Spare Supplies or Components for Purchase
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:39PM

Whats up guys. I am a new builder just a few rods into my journey. Im looking to buy some supplies or components to have on hand if anyone has anything laying around. Thank you!

Options: ReplyQuote
Seeking Suggestions and Exchange of Ideas
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:39PM


Options: ReplyQuote
Difficulty and Best Paint Suggestions for Repainting Rod Blank Over Factory Color - Need Advice!
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:40PM

General question!? How hard or easy is it to paint your rod blank on top of the factory color? If possible what paint is best? Hard finding the two tone Im looking for! Thanks everyone!

Options: ReplyQuote
New to Rod Building: Seeking Feedback on Guide Set and Spacing for First Saltwater Inshore Spinning Rod
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:41PM

Good morning everyone..Im new to rod building and have 3 casting rods under my belt..about to start on my 1st saltwater inshore spinning rod and was looking for some feedback..this rod will be for speckled trout and redfish..Im planning on going with a 7ft NFC MB 703-1 Delta blank, Aero reel seat and Fuji KL-H guide set..guide train size 209H..is this a good guide set? also, I was looking for the guide spacing recommendations on the NFC chart as per their website but I dont see the MB 703-1, I only see the recommendations for MB 705 and 704..what guide spacing would yall recommend to go by? Any help is appreciated

Options: ReplyQuote
Seeking Sources for Alternate Carriage Rollers for Alps Carriage
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:41PM

Good morning all, anyone know where alternate carriage rollers can be found at for the alps carriage?

Options: ReplyQuote
Need Recommendations for a Budget-Friendly 2-Piece 12' Blank for ABU 6500 Reels - Prepping for Surf Drum Event at OBX
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:41PM


Looking for possibpe blank recomendations / input.

I live in central NC. Almost all my fishing is lakes / rivers , and my rods are built accordingly. Mainly target catfish, and use a series of 8 glass rods I built every weekend.

If I do go to the coast, I generally would just take one of my catfish / carp spinning rods ( 7 and 8) and fish from one of the piers.

However - in a month I am going to the OBX for a surf drum event.

I plan to use a pair of ABU 6500 reels - dropping them off this week to have them cleaned , have the levelwind removed , and basically hotrodded.

Rods - one hand says just got buy a pair of BPS 12 surf rods for the cheapest price , for a 3 day trip and leave it simple.

Other hand is since I started building rods , Ive only used rods Ive built. Casters , spinners and fly.

I do not get fancy. Its utilitarian but clean for me.

Anyone have a recommendation for a budget friendly 2 piece 12 blank, that would mate well with a 6500?

If Im going to build them, given my recent shipping experiences , I need to ge them ordered now.

Pic is for attention.

Options: ReplyQuote
Seeking Used Alps Power Wrapper with Upgraded Chuck: Need Recommendations for Most Affordable Purchase Options
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:41PM


Anyone got an alps power wrapper with upgraded chuck for sale? Looks like janns net craft is the cheapest option overall for purchasing new at $505 with free shipping. Anyone have any other recommendations for websites to purchase that can beat the total price with shipping? Hff total would be around $545-550 with shipping. Thanks!

Options: ReplyQuote
Wisc Rod Builders Group Outing - Reminder for October 5th Event in Milton, WI
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:41PM

Reminder this sat October 5th is the Wisc rod builders group outing in Milton Wi contact Al Hutchison for more info

Options: ReplyQuote
Discussing the Advantages of Carbon Fiber Grips: Sensitivity, Preference, or Durability?
Posted by: Custom Rod Builders FB Post (Moderator)
Date: September 30, 2024 02:41PM

What is the advantage of carbon fiber grips? Is it sensitivity? Preference? Durability?

Options: ReplyQuote
Re: Seeking Recommendations: Best Quality Blanks with Reasonable Shipping Times
Posted by: Steven Paris (---.84.23.98.dynamic.ip.windstream.net)
Date: October 03, 2024 07:37AM

From any of the sponsors listed on the left who sell blanks.
Steve

Options: ReplyQuote
Pages: Previous12345
Current Page: 5 of 5


Sorry, only registered users may post in this forum.
Webmaster