Join Chris and Hunter as they break down exactly what you need to build the baddest musky rod on the water!

Watch Live as we build a handle section, discuss reel placement, and set up a guide set worthy of these fierce boatside battles.

Even if you don't target musky, stay for the valuable tips for everything from heavy freshwater to nearshore saltwater rods!

Watch Live on the Mud Hole YouTube & Facebook tonight at 6:30pm EST.

[bit.ly]

Link to enter giveaways and watch the show!

#mudholetackle #customrods #builtnotbought #mudholelive [bit.ly]

Can anyone one tell me where to purchase the moneymaker or Allenwrench rod blanks for pay lake setup?

What are the best quality blanks that offer reasonable shipping times? Thank you

When building rods I keep foaming pump hand sanitizer near me. Great for making sure you dont have anything on hands.

Question: what are you using for air filtration inside the wrapping/ epoxy shop! Need one rush ! Good price per quality and easy to mantain? Brand ? Size ( my shop is small 11x10 thanks

I have an old rod I want to refinish what do you use to refinish the rod blank its an old brown fenwick if that makes a difference.

Thanks for the advice everyone. I'm brand new to this and really appreciate the advice given in this group.

What is the easiest way to make sure I'm putting guides on straight? I was given an old rod that was missing all the guides. For now I'm just eyeballing it lol

I hope this grip turns out nice its an awful mess now

Sorry but I have another question. What are the pros and cons of use thread sealer/color preserver on under wraps? If I use it will the thread epoxy work its way thru to the blank?

I hope I'm not wearing everyone down with my questions, but this is the only site that participates and gives straight answers. I have CRB rails. Is the G2 the only power wrapper I can use? I was looking at the Flex Coat 36v wrapper. Is this any good and can I use it? What other options are there for me?

Does anyone know how to remove the jaws out of the head as I open the jaws, it stops.. it seems like there is some kind of block and it wont let me pass that [www.cartertools.com]

Good morning everyone..I have a question about fonts for decals and hoping for some guidance..Im new to rod building and have barely 3 rods under my belt..hoping to make this a side hobby..been using dafont website to download fonts for the rod decals..I just finished building one for personal use and found a font I really liked in the dafont website but when I downloaded it, there was an extra Microsoft word document attached to it explaining to me thats its only for personal use and included a website to purchase full version..my question is, do I need to purchase the full version if I were to sell some rods in the future using this font or can I use the free version provided by dafont? Dont want to get into any legal issues in the future. Any input will be appreciated..thanks!

Can you put color preserver on crb metallic thread? If so does it dampen the metallic nature of it?

I built a rod with prokote and crb metallic thread. That sits exposed to heavy UV most the summer in puget sound and it color bleached within a summer. Any tips would be appreciated as I plan to do another salmon trolling rod soon

Im still new but thinking about making a leather inlay on the cork handle on a flyrod. Any links to good guides or good tips?

Might be a dumb question but how will doing a 16 to 18 inch trim wrap effect a rods performance if at all

I need to tale a bit of the top on a spinning blank. What is the best Way to cut in the blank? Knuge, scissor or ?

I have seen a lot of info saying that I should use a flame to release air bubbles in epoxy. I was asked if a heat gun or blow dryer could be used. So, can a heat gun or blow dryer be used to release the air bubbles in epoxy?

Where can I get custom stickers