SPONSORS
2025 ICRBE |
BATSON smart dryer dimension
Posted by:
steve hall
(---.lsan.ca.frontiernet.net)
Date: August 27, 2024 03:21PM
if anyone has one already would it be possible to take a measurement from the wall to the center of the chuck?
Thanks Re: BATSON smart dryer dimension
Posted by:
steve hall
(---.lsan.ca.frontiernet.net)
Date: August 27, 2024 03:39PM
its 4.25 if anyone else needs it Re: BATSON smart dryer dimension
Posted by:
roger wilson
(---.cust.tzulo.com)
Date: August 31, 2024 12:31AM
Steve, is that measurement made in millimeters, centimeters, meters, miles, furlongs, acres, altitude, inches, feet or hex acre? Re: BATSON smart dryer dimension
Posted by:
Mike Ballard
(---.ip-198-50-155.net)
Date: August 31, 2024 09:01AM
Well let's take a guess Roger........... if you have ever seen such a common chuck you know that the thing is about 4 inches across, so the radius cannot possibly be 4.5mm. That also leaves out centimeters at the same time. It's a distance not an area so acre is out too. Feet would much too large since the chuck only about 4 inches across. Miles the same. So my best guess, based on the most basic of information and having at least seen photos is that the measurement he is giving is in inches. 4.25 inches would seem about right. Re: BATSON smart dryer dimension
Posted by:
David Baylor
(---.res.spectrum.com)
Date: August 31, 2024 09:40AM
lol Mike ..... bravo !!! Re: BATSON smart dryer dimension
Posted by:
Ben Lori
(---.103.147.96.tpia.cipherkey.com)
Date: August 31, 2024 02:18PM
Talking about this batson dryer. I saw the video of the product. Thinking it's nice to have that new tech control and set a timer on each motors.
What I was less impressed with was how much work it seemed to be just to plug the butt of the rod into the rubber clutch. I am used to see the wire spring or the plastic clutch with rubber band. Has anyone tried this rubber clutch from Batson? Seems a lot stiffer than the flexcoat but I might be wrong. Sorry, only registered users may post in this forum.
|