SPONSORS
2025 ICRBE |
North Fork Composite X-ray MB 736-1
Posted by:
Kohlby Ohl
(---.mycingular.net)
Date: March 15, 2023 02:21PM
Looking for the dimensions at 10” from
The butt for a Fuji ecsm blank exposed reel seat. Thanks. Re: North Fork Composite X-ray MB 736-1
Posted by:
Ken Delbridge
(192.55.55.---)
Date: March 16, 2023 12:59AM
A 13.0mm ECSM fit one I built without any issues on a 10.5in blank butt to lower end of real seat position, but it was a little snug with the spline aligned. However, I would wait until you have the blank in hand to measure out the handle & seat needs. My records indicate a 0.8mm delta between the blank diameters at the top of the reel seat to the bottom of the real seat, with right around ~13mm at the top diameter (so 13.8mm at the lower end of the seat). Re: North Fork Composite X-ray MB 736-1
Posted by:
Kohlby Ohl
(198.59.178.---)
Date: March 16, 2023 06:11AM
Thank you! Sorry, only registered users may post in this forum.
|