SPONSORS
2024 ICRBE EXPO |
Guide sizing for st - 902 north fork composites 9ft
Posted by:
Joshua pettit
(---)
Date: February 27, 2023 12:08AM
I’m looking for north fork composites recipe for guide sizing on the st-902 salmon steelhead blank 9ft 2in total of 9 guides including tip. any help would be appreciated. Re: Guide sizing for st - 902 north fork composites 9ft
Posted by:
Spencer Phipps
(---)
Date: February 27, 2023 01:54AM
Where do you fish? I'm assuming a spinning rod. Edited 1 time(s). Last edit at 02/27/2023 01:57AM by Spencer Phipps. Re: Guide sizing for st - 902 north fork composites 9ft
Posted by:
Joshua pettit
(---)
Date: February 27, 2023 08:49PM
This is a spinning rod I’m building for pyramid lake in Nevada. Re: Guide sizing for st - 902 north fork composites 9ft
Posted by:
Mark Talmo
(---)
Date: February 27, 2023 09:51PM
Joshua,
I’ve always wanted to fish Pyramid Lake due to it being native waters for the Lahontan Cutthroat Trout, possibly even more rare than Californian Volcano Creek Goldens. A little more information is needed to offer suggestions for your guide train; reel size, type line (braid, mono / fluoro), line test, blank action and power. At this point, I am thinking you will need 2-3, possibly 4 more guides + a tip top rather than stated (9 including tip top). Waiting for your reply. Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Re: Guide sizing for st - 902 north fork composites 9ft
Posted by:
Joshua pettit
(---)
Date: March 01, 2023 09:05PM
Reel- diawa ballistic 2500
Line- diawa j braid 8x w/10lb beyond flora leader line The 903 hm is a mod fast medium light 9’2 two piece blank rated 1/4 to 5/8 spinning rod. I fish 10 gram tube jigs and currently am fishing a Phoenix black chrome 8’2 which is a good rod but a bit stiff for my liking. Re: Guide sizing for st - 902 north fork composites 9ft
Posted by:
Norman Miller
(Moderator)
Date: March 01, 2023 10:16PM
I have built a number of 9’ light to medium light steelhead rods using 8 to15 # braid on 2500 to 3000 spinning reels. My favorite guide setup is the Fuji KR concept. I will use either KLH16H, KLH8H, and KLH5.5M, or KLH20H, KLH10H, and KLH5.5M for the reduction train, and KB/KT runners in size 4.5 or 5. I normally use 2 KB guides following the reduction train with the rest of the running guides being KTs. For a 9’ rod I normally use 10 to 11 guides total not counting the tip top.
The NFC spacing chart is probably based on using New Guide Concept guides. With the reduction train probably using 25Y, 16Y, 10Y, 8LY guides, and the runners being size 6L guides with a matching tip top. Norm Sorry, only registered users may post in this forum.
|