SPONSORS
2024 ICRBE EXPO |
Rod tubes for short multi-piece fly rods.
Posted by:
Rob Matarazzo
(---.dyn.optonline.net)
Date: January 08, 2023 11:26PM
I built a 5-piece 7-foot fly rod. The sections are only 17” long. I’ve been so far unsuccessful in finding tube that is not way too big for the rod. Any suggestions? Re: Rod tubes for short multi-piece fly rods.
Posted by:
Bill Hickey
(---.nycap.res.rr.com)
Date: January 09, 2023 04:54AM
2 companies come to mind:
REC in CT, they have been around for ages. Mike McFarland bought Landmark when Ron retired, and is just now getting this new part of his business up and running. Mike is in PA. Both offer custom sizes and various options. Re: Rod tubes for short multi-piece fly rods.
Posted by:
Jim Crisci
(---.compute-1.amazonaws.com)
Date: January 09, 2023 06:51AM
Also check out Clear Creek Fishing Gear. They custom build to whatever size you need. Re: Rod tubes for short multi-piece fly rods.
Posted by:
Spencer Phipps
(---)
Date: January 09, 2023 09:49AM
Angler's Workshop used to custom cut tubes for me while I waited. Re: Rod tubes for short multi-piece fly rods.
Posted by:
Rob Matarazzo
(---.dyn.optonline.net)
Date: January 09, 2023 07:02PM
Thanks guys. I will look into those options. Re: Rod tubes for short multi-piece fly rods.
Posted by:
roger wilson
(---)
Date: January 10, 2023 01:11AM
Pick up a 20 inch piece of thin wall pvc pipe of the correct size, put a cap on each end and be happy.
Best wishes. Sorry, only registered users may post in this forum.
|