SPONSORS
2024 ICRBE EXPO |
Your Black Friday Purchases/Cyber Monday Wish list
Posted by:
El Bolinger
(50.233.0.---)
Date: November 28, 2022 08:35AM
Share what you got on Black Friday and are still looking at for Cyber Monday...
Black Friday bought: getbitoutdoors: Start up Deluxe kit - (I got this one because the reamers looked better than mud hole kit, but the wrapping station looks weak, plus arrived with defects in the rod rests) 4 Fuji nocp thread size A U-40 ROd bond 8oz 5 ft ML spin rod kit 5'6 MH cast kit 4 decals for the spinning rods North Fork Composites: MB 735 HM MB 7109 X ray Mirror finish DS 721 xray (accidentally ordered wrong finish, I emailed hoping to switch to mirror finish so hopefully they can) MB 808 NEO 3 Carbon FIber grips Mud Hole 4 color series blanks and reel seats guies and tip tops, grips, foregrips, butt caps, and hook keepers for each OEM Carbon fiber full grip Gen 4 Low build 8 oz Orange Winn rear grip EXTRA eva rear grip just in case Propaste Pate Epoxy 8 oz (will compare with the U-40 epoxy I ordered before) Winn orange butt grip American Tackle Airwave Slim (x2 casting and 1 spinning) Extra sz 5 AT Running guides OEM Casting guide kit 9pc 3 Fuji Micro Spinning Tops (DOES IT MATTER IF ITS A SPINNING TOP FOR A CASTING ROD?) for the NFC blanks Ringlock Heavy top for the 808 NEO blank 3 polyurethane arbors (just in case) 2 fuji gtraphite arbors (to compare) Red/black Winn grip set 3 eva fore grips (just in case) Fuji TCSM reel seat Fuji VSS reel seat Hook keepers plus a couple extra and a big one for the 808 Winn butt purple Winn butt green small and medium winding check set Zirconium oxide spin guide kit Titanium oxide spin guide kit OEM micro guide spin kit extra eva butt CYBER MONDAY WISH LIST more stuff haha - I have no idea what I need to get for back up/ good to have as a builder because I haven't started my first build yet. I'm thinking another set up to build a rod for my wife, was gonna go NFC but the deal didn't apply to one more rod ( I would've had to buy 3 more... I almost did haha) Edited 1 time(s). Last edit at 11/28/2022 11:51AM by El Bolinger. Re: Your Black Friday Purchases/Cyber Monday Wish list
Posted by:
Lynn Behler
(---.44.66.72.res-cmts.leh.ptd.net)
Date: November 28, 2022 07:57PM
Is this stuff part of your 4 rods by X-mas deal? Re: Your Black Friday Purchases/Cyber Monday Wish list
Posted by:
Aleks Maslov
(Moderator)
Date: November 28, 2022 09:23PM
Ed,
Thank you very much for considering/purchasing NFC as a blank choice. Best Regards, Aleks Re: Your Black Friday Purchases/Cyber Monday Wish list
Posted by:
Spencer Phipps
(---)
Date: November 28, 2022 10:22PM
No wonder things are on backorder. LOL. Re: Your Black Friday Purchases/Cyber Monday Wish list
Posted by:
El Bolinger
(---.bstnma.fios.verizon.net)
Date: November 28, 2022 11:11PM
@ALEKS MASLOV - I did order this blanks, I reached out through phone and email to correct the order as I accidentally ordered the unwanted finish for the DS721 but meant to order the mirror finish.
@LYNN - yes this is all to get me set for my first build, or four builds rather. The start up kit and components are already here. The NFC Blanks are for after, I'm hoping I got all the things I needed. I waited on some reel seats so I can get exposed blank seats after I measure. I'll be missing the big sales but really want the exposed blank. @SPENCER- honestly muhole already shipped my second order, they're definitely killin it. Re: Your Black Friday Purchases/Cyber Monday Wish list
Posted by:
Spencer Phipps
(---)
Date: November 29, 2022 12:15AM
Just got my Mudhole order from Friday, Florida to western Oregon, can't get much further apart then that. Sorry, only registered users may post in this forum.
|