I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Offset casting handles
Posted by: Ron Schneider (---.mid.dyn.suddenlink.net)
Date: November 23, 2022 09:07AM

Here is link to the "offset" casting reel seats and grips,
they are a complete assembly and attach by gluing the blank into the end of the handle assembly.
[www.schneidersrods.com]

They are new old stock.

Best wishes,
Ron Schneider
Schneider's Rod Shop
Mountain Home, Arkansas
[www.schneidersrods.com]
mtnron40@yahoo.com
870-424-3381

Options: ReplyQuote
Re: Offset casting handles
Posted by: El Bolinger (---.bstnma.fios.verizon.net)
Date: November 25, 2022 07:47AM

To fit a blank the blank butt must be exactly .5?

Any size 20 Butt cap will fit from any brand?

Options: ReplyQuote
Re: Offset casting handles
Posted by: Spencer Phipps (---)
Date: November 25, 2022 01:00PM

You build up the end of the blank if it's smaller than 1/2 inch, if the depth of your 20 mm butt cap is short for the provided tenon on the back of the grip, you just shorten the tenon a bit, so yes, any 20 mm butt cap will fit. Myself I prefer blank through construction, but to each your ow, I can see a way to extending a rod's length a bit with this system.

Options: ReplyQuote
Re: Offset casting handles
Posted by: El Bolinger (---.bstnma.fios.verizon.net)
Date: November 26, 2022 09:52AM

Do you mean there's a way to attach that to a blank all the way through from front to back?

Options: ReplyQuote
Re: Offset casting handles
Posted by: Spencer Phipps (---)
Date: November 26, 2022 10:44AM

Nope.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster