I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Breakaway Cannon Trigger
Posted by: Scott Grady (---.new.res.rr.com)
Date: November 05, 2022 10:27PM

Have any of you used a Breakaway Cannon Trigger on you surf casting spinning rods? Was thinking about better ways to mount besides electrical tape or zip ties.
Can't imagine tape on a custom rod.
Scott

Options: ReplyQuote
Re: Breakaway Cannon Trigger
Posted by: Mark Talmo (---)
Date: November 05, 2022 11:58PM

Scott,
I am uncertain that you and I are talking about the same device to hold the line of a spinning reel while casting with something other than one’s index finger, but I think so. Although I do not do a lot of surf fishing, I learned about this casting aid from this site, purchased one, installed it on my rod, and am happier than a pig in slop that I did = HUGE relief on my finger!!! Mine is still mounted with a zip tie (uncomfortable) but plan on permanently mounting to the rod with thread wraps when convinced it is in the perfect location.

Mark Talmo
FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE.

Options: ReplyQuote
Re: Breakaway Cannon Trigger
Posted by: Gary Michael (38.83.150.---)
Date: November 06, 2022 03:38PM

Since switching to braid on my drum spinning reels, the "trigger" has probably saved my finger from shreading., I suggest you try tape or zip ties til you determine where and if you like it. it's you rod, so treat it like its yours and enjoy using it.
Tight Lines and Fresh Bait

Options: ReplyQuote
Re: Breakaway Cannon Trigger
Posted by: Bob Herman (---.nyc.res.rr.com)
Date: November 07, 2022 08:14AM

I'm using one on my 14' Vapor Trail. It's set up South African-style with the spinning reel mounted about 11 inches from the butt and the trigger placed above the spool edge.
In South Africa they call them "bionic fingers". I have it taped on with bag sealing tape, which is very strong but it ain't exactly pretty but I'm not fussy. It works. Try using tape temporarily until you find the right placement, then thread-wrap it on, like a guide.

Options: ReplyQuote
Re: Breakaway Cannon Trigger
Posted by: Mark B. Gonsalves (---.hawaiiantel.net)
Date: November 07, 2022 01:16PM

The Cannon is the way to go for distance fishing with braid. I don't think permanently mounting on a rod is a good idea because if you ever change the reel you're using you won't be able to adjust where the cannon is mounted. Another thing I do is mount the cannon on the side of the rod instead of directly above the spool. I use zip ties to mount.

Options: ReplyQuote
Re: Breakaway Cannon Trigger
Posted by: Scott Grady (---.central.biz.rr.com)
Date: November 07, 2022 03:12PM

Thank you for the comments. I wonder if a velro strap would work.
Scott

Options: ReplyQuote
Re: Breakaway Cannon Trigger
Posted by: Mark Talmo (---)
Date: November 07, 2022 03:42PM

Scott,
Velcro may be too spongy but worth a try. Wrap it as tightly as possible and maybe even 2 rotations.

Mark Talmo
FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster