I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Mardi Gras Mombo
Posted by: Mark Brassett (---)
Date: October 17, 2022 01:30PM

Check this out! I built a 7' ML NFC delta spinning rod for my sisters birthday present. Custom cork handle, NFC MB 703-1 Delta blank, Alps titanium/gold guides, metallic purple/green/gold thread work, a Magazine St. gold decal, and a Mardi Gras jesters mask decal. She caught this 25# red on it in a canal just 300 yds from the camp. 1/4 oz jighead with a 3" blue moon/ chart tail grub. 10# test mono (we were after small specks). After she hooked up I adjusted her drag just below the breaking point and the red began slowly spooling her. After about five minutes, the spool only had about 75' of line left so I had her grab the spool and stop the drag from slipping. As the line continued to stretch out, the red would either turn left or right, or break off. As they usually do at this point, the red ran out of strength and turned. She gradually gained line and 15 minutes later had the red at the net.





Edited 1 time(s). Last edit at 10/17/2022 01:32PM by Mark Brassett.

Options: ReplyQuote
Re: Mardi Gras Mombo
Posted by: Aaron Petersen (12.144.64.---)
Date: October 17, 2022 01:37PM

Great rod! Great story!

Options: ReplyQuote
Re: Mardi Gras Mombo
Posted by: David Baylor (---.res6.spectrum.com)
Date: October 18, 2022 07:39AM

Now that had to be fun !!!! That is a big ole fish right there LOL

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster