SPONSORS
2024 ICRBE EXPO |
How it all began
Posted by:
John Cates
(Moderator)
Date: September 23, 2022 11:28AM
I know I posted this a few years ago, but I just watched it again and I think its worth a look if you haven't seen it or another if you have.
[www.youtube.com] Flex Coat Company Professional Rod Building Supplies www.flexcoat.com Re: How it all began
Posted by:
Chris Catignani
(---)
Date: September 23, 2022 01:10PM
I remember when FlexCoat first came out...it was totally a game changer for me.
At that time I was useing Gudebrod #111 Color Preserver and #222 Rod Finish...and it took 5 or 6 coats. I miss that old color preserver...but not the varnish. Re: How it all began
Posted by:
Mark Talmo
(---)
Date: September 23, 2022 03:54PM
John,
Thanks for the video. It comes as no surprise to me that the roots of such a great company as Flex Coat started from such humble beginnings. You and Roger provide outstanding products and service to the rod building community. “That’s how we do it” = that’s how all should do it!!! Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Re: How it all began
Posted by:
Tom Kirkman
(Moderator)
Date: September 23, 2022 04:58PM
Roger sat for an interview which was published in an early issue of RodMaker back around 2000 or so. Interesting stuff.
.............. Re: How it all began
Posted by:
Robert A. Guist
(---.res6.spectrum.com)
Date: September 23, 2022 05:29PM
Hi Tom.
Here you go. 5/6 Interview: Roger Seiders The Man Behind Flex Coat. By Andy Dear. 10 Enjoy. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Sorry, only registered users may post in this forum.
|