SPONSORS
2024 ICRBE EXPO |
Reel Seat Finished With Permagloss
Posted by:
Jeff Shafer
(141.151.75.---)
Date: February 16, 2009 07:26PM This insert is made from Chechen, and is finished using the same technique I use with CA, and others use with Tru-Oil. Successive coats are built to beyond disired diameter, then wet sanded with progressively finer sandpaper followed by wet 8000 & 12000 Micromesh. Final Step is a heavy cut car polish followed by a scratch & swirl remover. Sorry, only registered users may post in this forum.
|