I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2022 ICRBE
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Back Creek Custom Rods
BatsonRainshadowALPS
Banana River Rods
CRB
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mickel's Custom Rods
My Rod Shop
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
ProProducts
ReelSeatBlanks.com
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VooDoo Rods

NFC 10wt iconoglass guide spacing
Posted by: Alex purvis (---)
Date: May 01, 2022 03:02PM

Hi everyone,

Has anyone built up a 10wt iconoglass? If so, I was looking to get suggestions on guide spacing you used. It looks like my order I placed for guides will be delayed and I was wanting to go ahead and at least have a starting point I can adjust from once I test cast.

Thanks
Al

Options: ReplyQuote
Re: NFC 10wt iconoglass guide spacing
Posted by: Phil Erickson (---)
Date: May 01, 2022 08:33PM

I believe they supply a guide train chart..

Options: ReplyQuote
Re: NFC 10wt iconoglass guide spacing
Posted by: Aleks Maslov (Moderator)
Date: May 01, 2022 09:19PM

Hi Alex,

Try the link below :

[northforkcomposites.com]

Type in IG and the 8’6” 10wt should come up.

Best,
Aleks

Options: ReplyQuote
Re: NFC 10wt iconoglass guide spacing
Posted by: Alex purvis (---.res6.spectrum.com)
Date: May 01, 2022 10:28PM

Aleks,

I came here after your website because I couldn’t find that to save my life for the iconoglass rods. Thanks for helping this blind bat out!

Now for the fun part: reaming cork to fit a 10wt fiberglass butt section lol

Thanks again!

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster