SPONSORS
2024 ICRBE EXPO |
How thick: Carbon Fiber tubing for Tennessee Handle (Ultralight) 1mm or 0.5mm?
Posted by:
Mo Yang
(---)
Date: March 07, 2022 01:28AM
I am looking at getting some carbon fiber tubing to try out for tennessee handle for ultralight rods. I am thinking of 23mm diameter and can get the wall thickness in either 0.5mm or 1.0mm. This is for ultralight using 2-4 lbs test so I don't anticipate high stress. Can you get by with 0.5mm or would 1mm be necessary?
Thanks in advance for any insight. Edited 1 time(s). Last edit at 03/07/2022 03:04AM by Mo Yang. Re: How thick: Carbon Fiber tubing for Tennessee Handle (Ultralight) 1mm or 0.5mm?
Posted by:
Chris Catignani
(---)
Date: March 07, 2022 09:18AM
Mo...I was just looking at what Ive been working with and it looks to be 1/32 of an inch. Thats right in between .5mm and 1.mm.
I think .5mm would be fine. Re: How thick: Carbon Fiber tubing for Tennessee Handle (Ultralight) 1mm or 0.5mm?
Posted by:
Spencer Phipps
(---)
Date: March 07, 2022 02:40PM
I agree, if it was a heavy power rod in a rod holder, or some kind of eqivilent I might be leaning toward the 1.0 mm tube. Re: How thick: Carbon Fiber tubing for Tennessee Handle (Ultralight) 1mm or 0.5mm?
Posted by:
Mark Talmo
(---)
Date: March 07, 2022 04:07PM
Mo,
The .5mm wall CF tube should be fine for an UL, especially if using a full-length foam bushing. I think you may be able to just have 1in bushings at either end but check the compressive “squish” factor first. Are you using slip-rings or just taping the reel to the TH? If using slip-rings, you will need to concern yourself with 3 issues; 1. Make certain they are tapered or swagged to fit the reel feet, 2. Check the ID of the rings BEFORE ordering the compatible size CF tubing, 3. Make certain to check how well the rings secure the reel to the hard surface of the TH BEFORE gluing everything up. My cork or birch bark THs work great with proper slip-ring (no slippage) but I have NOT tried them on a hard CF surface (slippage?). Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Re: How thick: Carbon Fiber tubing for Tennessee Handle (Ultralight) 1mm or 0.5mm?
Posted by:
Mo Yang
(---)
Date: March 08, 2022 04:10PM
Thanks all for the replies.
Mark, I just tape the reels instead of slip rings. :) Sorry, only registered users may post in this forum.
|