I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

New Issue
Posted by: Tom Kirkman (Moderator)
Date: January 25, 2022 10:29AM

[www.rodmakermagazine.com]

............

Options: ReplyQuote
Re: New Issue
Posted by: david taylor (---)
Date: January 25, 2022 02:02PM

Congratulations on 25 years of business!!! That is a major accomplishment in any business endeavor, and certainly in magazine/publishing.

Options: ReplyQuote
Re: New Issue
Posted by: Robert A. Guist (---.res6.spectrum.com)
Date: January 25, 2022 03:37PM

Congrats Tom & many more.

Tight Wraps & Tighter Lines.

Bob,

New Bern, NC.

Options: ReplyQuote
Re: New Issue
Posted by: Chris Catignani (---)
Date: January 25, 2022 03:49PM

Congratulations Tom...quite an accomplishment.

Options: ReplyQuote
Re: New Issue
Posted by: Sammy Mickel (---.43.187.173.dynamic.ip.windstream.net)
Date: January 26, 2022 04:21PM

Congratulations on a quarter of a century of contiued excellence and sharing of knowledge and skill.

Options: ReplyQuote
Re: New Issue
Posted by: Bill Falconer (---.lightspeed.brhmal.sbcglobal.net)
Date: January 28, 2022 10:07AM

Can't believe it's been 25 years...and can't imagine building rods without RodMaker Magazine. Congratulations, Tom - and THANKS!

Options: ReplyQuote
Re: New Issue
Posted by: Ernest Horvath (---)
Date: February 10, 2022 11:47AM

Tom, congratulations on 25 years of a very informative publication. It goes hand in hand with the Expo and all the talented folks that attend. See you in two weeks. Keep up the great work.
Ernie Horvath
E.P. Custom Rod and Reel
Goldsboro, N. Carolina

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster