I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

original topic:NFC hair jig blank
Posted by: Lynn Behler (---.44.66.72.res-cmts.leh.ptd.net)
Date: December 25, 2021 07:45PM

SCV76 MLXF was a smash hit X-mas gift for my son, thanks to all for your input, especially Joel, Spencer, and Michael Danek (who chimed in on another forum.) This build was a step above, and beyond for me. See if this works, lol [www.rodbuilding.org]



Edited 4 time(s). Last edit at 12/25/2021 07:53PM by Lynn Behler.

Options: ReplyQuote
Re: original topic:NFC hair jig blank
Posted by: Jason Gofron (---)
Date: December 26, 2021 07:04AM

That st croix blank is a bad dude enjoy.

Options: ReplyQuote
Re: original topic:NFC hair jig blank
Posted by: Joel Wick (---.net)
Date: December 27, 2021 08:25PM

Glad to help and inspire, Lynn.

Just finished another one for me, as well; this one extended to 8'3" for steehead crankbait presentations.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster