SPONSORS
2024 ICRBE EXPO |
Stryker blanks
Posted by:
Thomas Kaufmann
(---)
Date: December 16, 2021 07:19PM
Do any of you have any first hand experience with the Stryker blanks? They look interesting Re: Stryker blanks
Posted by:
Tom Kirkman
(Moderator)
Date: December 16, 2021 09:15PM
They'll be at the Expo in a couple months. If you attend they'll have some for you to pull on.
............... Re: Stryker blanks
Posted by:
Josh Boege
(---)
Date: December 17, 2021 11:32AM
What expo? I’m a newbie and am interested in learning more. Re: Stryker blanks
Posted by:
Tom Kirkman
(Moderator)
Date: December 17, 2021 03:12PM
www.rodexpo.com
.......... Re: Stryker blanks
Posted by:
Richard Bowers
(---.ptld.qwest.net)
Date: December 20, 2021 01:43AM
Stryker purchased all of the remaining inventory and equipment from Rogue Rods when they went out of business. I have personally been to their facility and was very impressed with what they were doing and with the people working there. They have some very interesting blanks in the pipeline. Re: Stryker blanks
Posted by:
Thomas Kaufmann
(---)
Date: December 20, 2021 06:12PM
Richard,
Thank you very much! I always enjoyed Rogue blanks! I will certainly keep an eye on them and will order one up to try em out. Thanks Tom Re: Stryker blanks
Posted by:
Josh Hopkins
(---)
Date: December 28, 2021 01:07PM
Thanks for your interest! Stryker is located in Eugene Oregon. We did purchase the equipment and tooling from Rogue Rods a couple years ago. We have created our own line of finished rods for the PNW and have also designed and are producing blanks beyond our local fisheries. We have a growing selection of blanks covering many applications. We are very excited to be a part of this community and to provide affordable USA blanks for anyone in need. Josh Hopkins General Manager, Stryker Rods & Blanks strykerrods.us 541-505-7693 ext. 201 Sorry, only registered users may post in this forum.
|