SPONSORS
2024 ICRBE EXPO |
Re: If I had glass like this in 1970, I would have never have gotten into carbon fiber - Gary Loomis
Posted by:
ben belote
(---.hsd1.va.comcast.net)
Date: December 22, 2021 07:08PM
and no wind! Re: If I had glass like this in 1970, I would have never have gotten into carbon fiber - Gary Loomis
Posted by:
Pawel Tymendorf
(---.aa.ipv6.supernova.orange.pl)
Date: December 26, 2021 11:42AM
Aleks,
could you please compare Delta hybrid CB 704 Zentron to APFG742-1 ? Both are rated 12lb but I wonder if / how they differ, especially in terms of casting weight and overall performance Thank you Best regards, Pavel Edited 2 time(s). Last edit at 12/26/2021 11:43AM by Pawel Tymendorf. Re: If I had glass like this in 1970, I would have never have gotten into carbon fiber - Gary Loomis
Posted by:
Aleks Maslov
(50.106.16.---)
Date: December 31, 2021 11:49AM
Pawel,
The CB704 is a hybrid - class/carbon, so the backbone will be much stiffer than on the APF742. The CB704 is primarily intended as a light crankbait rod, that you can boat flip a bass with. The APF742 has a much more progressive / parabolic action. Take a look at the deflection charts too. Best Regards, Alex Re: If I had glass like this in 1970, I would have never have gotten into carbon fiber - Gary Loomis
Posted by:
Danny Smith
(---)
Date: April 27, 2022 07:34PM
I bought two 7'6" med action fast glass rods to build a couple of King trolling rods. I like what they look like. I put a long plastic handle with an aluminum gimbal butt. I think they will make nice trolling rods. Sorry, only registered users may post in this forum.
|