SPONSORS
2024 ICRBE EXPO |
Carbon grip for SK2 Spinning seat
Posted by:
Mike Ortega
(---.rochester.res.rr.com)
Date: November 06, 2021 05:37PM
Hi folks. Anyone have suggestions for a carbon grip that fits behind the sk2 Spinning seat? Fuji makes a cork one, but cant find any carbon fiber that indicates it will fit well..
Im not looking to build my own carbon fiber grips. Hoping someone has already found something? Thank you, -Mike Re: Carbon grip for SK2 Spinning seat
Posted by:
Spencer Phipps
(---)
Date: November 06, 2021 09:49PM
NFC makes the largest variety I know of, might be something there. The Fuji site should give you the specs for the seat if you don't have one to measure. Edited 1 time(s). Last edit at 11/08/2021 11:19PM by Spencer Phipps. Re: Carbon grip for SK2 Spinning seat
Posted by:
Norman Miller
(---)
Date: November 07, 2021 11:55AM
It appears that the Fuji grips designed to fit the SK2 spinning seat will also fit the TVS spinning seat, so the vice versa should also be true. NFC does sell CF grips that fit the TVS seats, so they should fit the SK2 spin seats.
Norm Re: Carbon grip for SK2 Spinning seat
Posted by:
Trevor Esparza
(---.block0.gvtc.com)
Date: November 08, 2021 04:40PM
The carbon grips made for the Sk2 casting seat will fit just fine. Mud Hole carries the one by CFX. Re: Carbon grip for SK2 Spinning seat
Posted by:
Mike Ortega
(---.rochester.res.rr.com)
Date: November 09, 2021 07:38PM
Actually, the cfx carbon grips for sk2 casting seat do not match up to the sk2 spinning seat. Ive tried. Still trying to identify tge NFC carbon grips for the TVS seat. Left message for them. Re: Carbon grip for SK2 Spinning seat
Posted by:
Michael Sutheimer
(---.wi.res.rr.com)
Date: November 10, 2021 04:39AM
This is the part # for the rear grip NFCG643C01 for the TVS. If you go on their website it is on page 6 of the carbon fiber grips. On the same page they also have part # NFCG639C01 listed for the SK2, don't say if it is for casting or spinning though. Re: Carbon grip for SK2 Spinning seat
Posted by:
Mike Ortega
(---.rochester.res.rr.com)
Date: November 11, 2021 10:29PM
Thank you Michael. Sorry, only registered users may post in this forum.
|