Variable Speed Rod Wrapper Control Pedal
Posted by: RICHARD LUCAS (---.dyn.optonline.net)
Date: September 13, 2021 04:58AM
Hello Rod Builders,
My name is Richard Lucas and I'm the owner of LUCAS MFG. Co., a Family owned Company since 1930.
One of our most popular products that we manufacture is our line of LOWBOY Foot Operated Variable Speed Controls
I don't know how to make or wrap a Rod, but I do know how to manufacture the "Best" Variable Speed Control & its not a plastic housing.
You may have the best made Rod Wrapper available, but that alone is not enough. You should also have the best
Motor Speed Control Pedal to operate your wrapper motor, and I'm speaking about our line of Variable LowBoy Speed Controls.
You may be satisfied with your current foot pedal which may have 5 speeds, but may not be very comfortable to control
the variable speed you require.
Our simple looking "Lowboy" pedals were designed to be used on our Flexible Shaft Hanging Motors in the Jewelry Industry.
As time went on, we realized that our "LowBoy" was also a favorite in many other industries such as Hobbyists, Acrylic Nail
Spa's, Wood Carvers and the Fishing Industry to add fishing line to a Reel, etc. etc.
At $59.00, plus $10.00 shipping, our LowBoy may become one of the best investments that you can make to go along with your Rod Wrapper.
I invite any Rod Builder to contact me direct to discuss this further.
You can call me or better yet, email me, since either way I'm looking forward to hearing from you.
Check out my Website, www.LucasDentalCompany.com and see the first item that pops up which is our LowBoy #9-3 and check out the Specs on this item,
you will not be disappointed at the quality that has gone into this little speed control.
Thank you for your time, I hope to hear from you,
Monday - Friday 9:00 - 3:00
And I am proud to say..... All of our products are "Made in the USA"
From a recent buyer on our Pedal: Fred Kneipp
I purchased a Lucas Lowboy foot pedal for my Renzetti Rod Lathe to replace the one provided with the lathe. My first impressions are it makes lathe very smooth and controllable, much better than original pedal supplied with the lathe. I will comment further with more use. Richard Lucas was very helpful and delivery was prompt.
Edited 2 time(s). Last edit at 09/13/2021 05:20AM by RICHARD LUCAS.