nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

2022 ICRBE
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
BRC Rods
Banana River Rods
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
Janns Netcraft
Lucas Mfg Co.
Mickel's Custom Rods
My Rod Shop
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
REC Components
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
Struble Mfg.
The Rod Room
Trondak U-40
Utmost Enterprises
VooDoo Rods

Posted by: Derick Jahnke (---)
Date: August 30, 2021 03:59PM

Do they even exist anymore? I've called several times a day, left emails, facebook messages, posts on their site and voice mails. Unable to get any response for near 2 months. Their website has fewer and fewer products in stock. Anyone had luck getting in touch?

Options: ReplyQuote
Re: Lamiglas
Posted by: Tyler Reinert (---.inf6.spectrum.com)
Date: August 30, 2021 08:35PM

I'm not sure. Alot of their blanks are difficult to track down. My favorite 9' was a lamiglass they stopped making. I've got two of them left.

Options: ReplyQuote
Re: Lamiglas
Posted by: Spencer Phipps (---)
Date: August 30, 2021 08:43PM

Supplies are harder to get and like the other companies they make more money making rods than they do selling blanks. There was a big spike in prices for supplies, around the first of July and if you haven't noticed the truckers are getting real testy, it could get worse before it gets better. It sure would help if materials weren't needed for other purposes right now.

Options: ReplyQuote
Re: Lamiglas
Posted by: Derick Jahnke (---)
Date: August 30, 2021 08:54PM

I might have to bite the bullet and drive up there when they are open on Wednesdays.

Options: ReplyQuote
Re: Lamiglas
Posted by: Fred Zimmermann (---.raintreegraphics.com)
Date: August 31, 2021 08:37AM

I've tried as well. I really wanted to be able to sell some of their surf rods but they won't even give me the time of day. They were high on my list that I wanted to sell for too, so I'm pretty bummed. They could at least tell me to get lost. I don't get any responses form Pac-Bay either. Keep us posted on your findings!

Options: ReplyQuote
Re: Lamiglas
Posted by: Kendall Cikanek (---.res.spectrum.com)
Date: September 03, 2021 08:05PM

I just had a negative experience with Lamiglas that is very telling. I bought a built Halibut rod in late May from them. I was very short on time between work, family events, and getting ready to go to Alaska for an extended fishing trip. The Halibut rod was the one I least cared about building myself. The rod came with two guides extremely mis-aligned. I called them and emailed them for days. Finally, I gave up and fixed the issue myself. I got a call two months after and was told they couldn’t help me if I already had worked on the rod. I mentioned that I had run out of time waiting for their response. Then, I was told that they had a volume of customer service issues that was overwhelming. As I conversed with the person it became very clear, and was admitted, that they are in a full crisis mode with an overload of quality and breakage related issues. I didn’t even bring up breakage as that wasn’t my problem.

I can’t imagine they get through whatever they have done to create this mess. I’ve got rods from the 1980’s they built that are still great. I now have to consistently tell people they are very old and built before issues started. In the mid 90’s their reputation in the PNW got soiled badly from “breakage”. It seems to have never quite recovered and lately a deeper downward spiral is the buzz in this region. It is sad in that the Posey family and this company built such an amazing legacy and has a prominent place in the history of rod building.

Options: ReplyQuote
Re: Lamiglas
Posted by: Michael Sutheimer (---.wi.res.rr.com)
Date: September 04, 2021 04:26AM

I got back into building a couple years ago. Been out about twenty years or so. Right about the time G Loomis blanks became unavailable. Loomis and more so Lamiglas were my go to blanks. Lamiglas did not offer as many models that fit my needs as Loomis. Lamiglas builds are still going strong for me and are among my favorite rods.

Anyways when I got back into things I immediately thought of Lamiglas for my blanks. Was greatly disappointed to see their product line had got even smaller was almost unavailable across the board and that they now had a not so good reputation.

Been trying various blank manufacturers. Have not really had any issues. But sure miss having my old favorite brands that I had total confidence in. Never would of thought of any other brands outside of Loomis Lamiglas and St Croix in the past. Now none of them are an option.

Options: ReplyQuote
Re: Lamiglas
Posted by: Derick Jahnke (---.ptld.qwest.net)
Date: September 05, 2021 09:00PM

I built on an NFC HM Steelhead blank. Great blank and despite the customer service woes, at least they picked up the phone. Don't know what is going on with Lami, but it sounds like they are operating on a super conservative budget.

Options: ReplyQuote

Sorry, only registered users may post in this forum.