SPONSORS
2024 ICRBE EXPO |
Hidden threads on Fuji ECSM?
Posted by:
Shawn Riebe
(---.midco.net)
Date: July 06, 2021 02:31PM
Is there a way to have hidden reel seat threads on the Fuji ECSM reel seat? If not, what is the closest reel seat to it that has hidden threads? Thanks. The Fuji gets rated so well by a lot of people, but I hate reel threads.
Thanks All Re: Hidden threads on Fuji ECSM?
Posted by:
Mark Talmo
(---)
Date: July 06, 2021 03:27PM
Shawn,
While I have not built with an ECSM seat, I see no problem ”converting” it to hidden threads. Purchase either a KDPS(16 or 17)BC/ASH if you want the metal hoods or a KSKSS(16 OR 17)ASH for the SK2 seats with a contoured nylon hood. Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Re: Hidden threads on Fuji ECSM?
Posted by:
Spencer Phipps
(---)
Date: July 06, 2021 05:26PM
All the 16, or 17 mm Fuji threads are the same. Surprisingly I have also used Pac Bay and other nuts interchangably. Re: Hidden threads on Fuji ECSM?
Posted by:
Shawn Riebe
(---.midco.net)
Date: July 06, 2021 05:50PM
Awesome!! Thanks guys. I will grab the ECSM and find a hidden thread but to put on it. Any other suggested threads you like would be great. Thanks Re: Hidden threads on Fuji ECSM?
Posted by:
Joel Babin
(98.39.46.---)
Date: July 08, 2021 03:59PM
If you look at Kistler rods website, you can see how they do it. I do something very similar with eva foam that makes palming a bait caster much more comfortable while hiding the threads. If I figure out how to upload pictures I'll share with you. Sorry, only registered users may post in this forum.
|