SPONSORS
2024 ICRBE EXPO |
Spey rod grip profile diagrams
Posted by:
Mike Commins
(---.freedom.wy.silverstar.com)
Date: June 07, 2021 11:23PM
Hello all, new member here with my first post. I've been lurking a while, and have already learned a lot as I go down the rabbit hole of rod building.
I'm building my first two-hander, a 12' 6 weight. I'll be gluing cork rings on the blank, and sanding them on a hobby lathe. I've done a re-grip of a single hander this way and it came out pretty good. I have several spey rods from which I can come up with a couple of sketches for different grip styles, but I'm wondering if there's anything for 2-handers that's similar to the Flex-Coat "Display of Fly Rod Handles," which I found very useful. Mike Re: Spey rod grip profile diagrams
Posted by:
Norman Miller
(---)
Date: June 07, 2021 11:39PM
Custom fly Grips, a sponsor, has templates for all kinds of fly rod handles including two handed grips.
[customflygrips.com] Norm Re: Spey rod grip profile diagrams
Posted by:
Mike Commins
(---.freedom.wy.silverstar.com)
Date: June 08, 2021 10:29AM
Thanks. I figured there must be something out there, I just couldn't find it.
Mike Re: Spey rod grip profile diagrams
Posted by:
Spencer Phipps
(---)
Date: June 08, 2021 05:26PM
Grip length = blank length + 1 inch. Sorry, only registered users may post in this forum.
|