I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

NFL logo decals - nail art?
Posted by: Ken Brown 2 (---.229.247.206.res-cmts.sm.ptd.net)
Date: March 09, 2021 12:52PM

I have read elsewhere that using NFL logos for nail art work well with rod building. I found some on Amazon real cheap, $5 for 12. I was wondering if anyone has used these before and if they are easy to apply.

Options: ReplyQuote
Re: NFL logo decals - nail art?
Posted by: Richard Kline (---.dyn.optonline.net)
Date: March 10, 2021 07:19AM

Ken:
I use nail art all the time, most are water slide it's a little tricky. I usually put some CP on the area the decal is going and it helps.

Rich Kline's
Custom Rods

Options: ReplyQuote
Re: NFL logo decals - nail art?
Posted by: Ken Brown 2 (---.229.247.206.res-cmts.sm.ptd.net)
Date: March 10, 2021 06:30PM

Thanks Rich. I have been dabbling with water slide decals. One time it went on flawlessly, other times I had the decal not come off completely and roll on itself.

Options: ReplyQuote
Re: NFL logo decals - nail art?
Posted by: Joseph Willsen (---.dyn.optonline.net)
Date: March 12, 2021 09:57AM

I have used the vinyl ones in the past.....easy to apply...one coat of CP to ensure no reaction with epoxy....then epoxy as usual.

I have applied them to wraps as well....I just applied them between coats of epoxy.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster