SPONSORS
2024 ICRBE EXPO |
NFL logo decals - nail art?
Posted by:
Ken Brown 2
(---.229.247.206.res-cmts.sm.ptd.net)
Date: March 09, 2021 12:52PM
I have read elsewhere that using NFL logos for nail art work well with rod building. I found some on Amazon real cheap, $5 for 12. I was wondering if anyone has used these before and if they are easy to apply. Re: NFL logo decals - nail art?
Posted by:
Richard Kline
(---.dyn.optonline.net)
Date: March 10, 2021 07:19AM
Ken:
I use nail art all the time, most are water slide it's a little tricky. I usually put some CP on the area the decal is going and it helps. Rich Kline's Custom Rods Re: NFL logo decals - nail art?
Posted by:
Ken Brown 2
(---.229.247.206.res-cmts.sm.ptd.net)
Date: March 10, 2021 06:30PM
Thanks Rich. I have been dabbling with water slide decals. One time it went on flawlessly, other times I had the decal not come off completely and roll on itself. Re: NFL logo decals - nail art?
Posted by:
Joseph Willsen
(---.dyn.optonline.net)
Date: March 12, 2021 09:57AM
I have used the vinyl ones in the past.....easy to apply...one coat of CP to ensure no reaction with epoxy....then epoxy as usual.
I have applied them to wraps as well....I just applied them between coats of epoxy. Sorry, only registered users may post in this forum.
|