SPONSORS
2024 ICRBE EXPO |
Alps rapid spin
Posted by:
Lynn Behler
(---.44.66.72.res-cmts.leh.ptd.net)
Date: February 22, 2021 08:06PM
I want to de-gloss (matte finish) the insert for this seat, any ideas? Re: Alps rapid spin
Posted by:
Mark Talmo
(---)
Date: February 22, 2021 10:18PM
Tumbler? Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Re: Alps rapid spin
Posted by:
Michael Danek
(---.alma.mi.frontiernet.net)
Date: February 23, 2021 08:49AM
Spray with matte finish clear Krylon or similar? Re: Alps rapid spin
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: February 23, 2021 09:14AM
Wet sand it with 800 to 1000 grit wet/dry sand paper. It will remove the gloss but not touch the fibers. I think a fine Scotch Brite grey pad, or extra fine steel wool would also work.
Norm Edited 1 time(s). Last edit at 02/23/2021 09:28AM by Norman Miller. Re: Alps rapid spin
Posted by:
Lynn Behler
(---.44.66.72.res-cmts.leh.ptd.net)
Date: February 23, 2021 09:17PM
Thx guys. Sorry, only registered users may post in this forum.
|