SPONSORS
2024 ICRBE EXPO |
Aero Seat Question
Posted by:
Robert Ford
(---)
Date: November 02, 2020 12:05AM
I just dry fitted the G2 handle and CCT aero seat,size 16 to a rod I'm building. In going with the ULH locking hood,how are y'all filling that front gap in the fore grip sleeve? I figure I can just glue a piece of eva foam in there but I just wondered if anyone has any special ways of doing it. I have been researching ideas and haven't found much. I guess just reaming it enough so it spins freely when locking down the reel? I like down locking btw. Is there a way to do carbon fiber inserts in the front of that hood? Gracias!
Robert Edited 1 time(s). Last edit at 11/02/2020 12:25AM by Robert Ford. Re: Aero Seat Question
Posted by:
Don @ American Tackle
(---.biz.spectrum.com)
Date: November 02, 2020 02:46PM
Good afternoon Robert...
The CFG is modeled after many JDM and cage style hoods on the market today... Fit a winding check in the seat or better yet us the Long Winding Check that we make to finish it off. [www.americantackle.us] Join the American Tackle Rod Building page on FaceBook... builders have come up with many other unique ides as well.. [www.facebook.com] _______________________________ God Bless, Don Morse 800-516-1750 ext. 1207 / don@americantackle.us Rod Building..... It's What We Do. Edited 1 time(s). Last edit at 11/02/2020 02:47PM by Don @ American Tackle. Re: Aero Seat Question
Posted by:
Robert Ford
(---)
Date: November 02, 2020 06:13PM
Thank you Don! I don't participate on Facebook but I will look into that long winding check. LOVE the G2 handle,just love it,and with that CCT aero,it's too sweet! Re: Aero Seat Question
Posted by:
Don @ American Tackle
(---.biz.spectrum.com)
Date: November 03, 2020 11:02AM
Thank you Robert...
If you ever have any questions feel free to reach out to me direct. _______________________________ God Bless, Don Morse 800-516-1750 ext. 1207 / don@americantackle.us Rod Building..... It's What We Do. Sorry, only registered users may post in this forum.
|