I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

DC motor for a Renzetti Rod Lathe
Posted by: Fred Kneipp (---.cnrocmta01.res.dyn.suddenlink.net)
Date: October 14, 2020 10:05AM

Does anyone know if there is a DC motor that will fit on a Renzetti wrapping lathe. I would like to be able to change the direction of rotation when I am building a rod.

Options: ReplyQuote
Re: DC motor for a Renzetti Rod Lathe
Posted by: roger wilson (---)
Date: October 14, 2020 10:21AM

Fred,
Please unhide your e-mail.

Options: ReplyQuote
Re: DC motor for a Renzetti Rod Lathe
Posted by: Kent Griffith (---)
Date: October 14, 2020 11:01AM

Sometimes having a degree in a subject is not enough apparently.



Edited 10 time(s). Last edit at 10/30/2020 09:26PM by Kent Griffith.

Options: ReplyQuote
Re: DC motor for a Renzetti Rod Lathe
Posted by: roger wilson (---)
Date: October 14, 2020 05:24PM

I'm familiar with the wrapper. I can give you some help.

Options: ReplyQuote
Re: DC motor for a Renzetti Rod Lathe
Posted by: Fred Kneipp (---.cnrocmta01.res.dyn.suddenlink.net)
Date: October 14, 2020 05:33PM

Roger, I’ve unlocked my email. Any help you can offer will be appreciated.

Options: ReplyQuote
Re: DC motor for a Renzetti Rod Lathe
Posted by: Fred Kneipp (---.cnrocmta01.res.dyn.suddenlink.net)
Date: October 14, 2020 05:36PM

Roger, I’ve unlocked my email. Any help you can give me will be appreciated.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster