I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Lamiglas G1000
Posted by: Al Cournoyer (---)
Date: September 16, 2020 07:40AM

Anyone have any experience with the Lami G1000 blanks? I’m looking to build an all purpose rod for ponds on the cape

Options: ReplyQuote
Re: Lamiglas G1000
Posted by: Robert Ford (---)
Date: September 16, 2020 10:59AM

If it is an original G1000 they were good workhorse type graphite blanks. I was under the assumption that this line was discontinued. I have a factory G1000 Pro rod and it's a good stick for the application. It's been my general experience that Lamiglas makes quality products and their customer service has always been top notch. I recently acquired an original certified pro mag salmon and steelhead blank ,mint and can't wait to build on it.

Robert

Options: ReplyQuote
Re: Lamiglas G1000
Posted by: Al Cournoyer (---)
Date: September 16, 2020 11:01AM

It’s the G1000 Pro Fly GP1085, I should have specified that sorry

Options: ReplyQuote
Re: Lamiglas G1000
Posted by: Robert Ford (---.hsd1.ca.comcast.net)
Date: September 16, 2020 11:30PM

Well I don't know about the fly blanks.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster