SPONSORS
2024 ICRBE EXPO |
Rear pocket 17 mm Aero reel seat? And hood question
Posted by:
Craig Clements
(47.197.104.---)
Date: September 07, 2020 06:48PM
Hello,
I’ve done several searches, and unfortunately have come up with different answers. I know that for the 16mm AMTAK Aero reel seat .920 Texalium tubing is supposed to fit perfectly. My issue is that I can’t find a definite answer for the 17 mm version. Does the .980 tubing fit without gaps? I’ve also seen where 1.05 was claimed to fit the 17mm.. so am unsure what to order. Lastly, I know the 16mm Fuji hoods can be used on the 16mm Aero seats, does anyone know if 17 mm hoods work on the Aero seat as well? Thanks, Craig Edited 1 time(s). Last edit at 09/07/2020 06:51PM by Craig Clements. Re: Rear pocket 17 mm Aero reel seat? And hood question
Posted by:
Don @ American Tackle
(---.biz.spectrum.com)
Date: September 08, 2020 04:01PM
The rear of the Aero-17 is 1.10" ... my guess is the 1.05 should fit it fine.
As far as the hood.. not sure why you would want to switch but it should fit okay. _______________________________ God Bless, Don Morse 800-516-1750 ext. 1207 / don@americantackle.us Rod Building..... It's What We Do. Re: Rear pocket 17 mm Aero reel seat? And hood question
Posted by:
Gary Kilmartin
(135.26.164.---)
Date: September 08, 2020 08:50PM
The 17 size Fuji hood does not fit a 17Aero seat. Made that mistake. Re: Rear pocket 17 mm Aero reel seat? And hood question
Posted by:
Spencer Phipps
(---)
Date: September 09, 2020 11:24PM
The tubing numbers .920" and .980" are IDs, the 1.05" measurement is the grips OD, the same as a standard rear cork grip. Sorry, only registered users may post in this forum.
|