I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Cork Specialties LLC
CRB
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
REC Components
ReelSeatBlanks.com
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Gaff building
Posted by: Jarrod Lowe (---)
Date: September 02, 2020 04:43PM

Going to be building a 6 ft gaff with 3 in hook. Was wandering about handle placement?

Options: ReplyQuote
Re: Gaff building
Posted by: roger wilson (---)
Date: September 03, 2020 10:30AM

Jerrod,
I don't know exactly what you mean by the question.

A gaff has a hook on one end of the blank and a handle on the other end of the blank.

As one would expect, use an appropriately sized handle and then use epoxy to glue it in place.

I also do one more thing. I like to employ a safety strap on the gaff so, that with the safety strap on my wrist, If my hand slips off the handle when gaffing a fish, the fish is still in the grasp of my wrist.

Take care

Options: ReplyQuote
Re: Gaff building
Posted by: Robert A. Guist (---.inf6.spectrum.com)
Date: September 03, 2020 10:57AM

Hello Roger.

I hope your not gaffing any big fish, with that cord wrapped around your wrist, they will pull you right in.

For smaller fish I guess it's fine.


Tight Wraps & Tighter Lines.

Bob,

New Bern, NC.

Options: ReplyQuote
Re: Gaff building
Posted by: Marcos Rodriguez (---)
Date: September 15, 2020 11:10PM

Cord wont work as u need to put hand over hand to bring gaff in .. i do grips about arms distance if i was just holding gaff. About a 36” area bottom up. If i use cord i cover all 36” and then add 10-12” towards tip for second grip. If Eva i get a section towards butt. A section towards 36” mark and one closer to tip. Nothing to near tip to drag in water. Just enough to be able to choke up on gafff and get it over side of boat

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster