SPONSORS
2024 ICRBE EXPO |
How much to compress cork
Posted by:
Keith Langford
(---)
Date: July 19, 2020 03:12PM
I just glued up my first cork handle, I tightened the cork clamp evenly until the handle compressed 1/8 of an inch. Is this sufficient pressure. Used 1/2 AAAA natural rings and 1/4 burl rings (Width). started at 2 1/2 and compressed to 2 3/8. Thank you Re: How much to compress cork
Posted by:
Tom Kirkman
(Moderator)
Date: July 19, 2020 03:15PM
1/8th to 1/4 of an inch is usually sufficient to close any gaps and bring all the mating surfaces together. As long as you don't see any gaps, you're fine.
........... Re: How much to compress cork
Posted by:
Keith Langford
(---.health-partners.org)
Date: July 20, 2020 11:20AM
Thank you Tom, as always Sorry, only registered users may post in this forum.
|