SPONSORS
2024 ICRBE EXPO |
Reamer sizing
Posted by:
David Hartman
(---)
Date: June 29, 2020 08:42PM
I am putting together a catfish rod. The butt size is 0.790.
Is my xl size reamer going to be large enough to ream the handle? Or do I need to go to the xxl size reamer? Thanks Re: Reamer sizing
Posted by:
Terry Kirk
(---)
Date: June 30, 2020 04:09AM
Measure it with your calipers. If you don't have calipers, go get some, they aren't that expensive. Re: Reamer sizing
Posted by:
John DeMartini
(---)
Date: June 30, 2020 09:36AM
Use your present reamer until it reaches its limit. If the hole in the handle is still to small go to to the next size reamer. Keep using larger reamers until you get the fit you want. Re: Reamer sizing
Posted by:
David Hartman
(216.75.200.---)
Date: June 30, 2020 10:32AM
Thanks everyone. Sorry, only registered users may post in this forum.
|