SPONSORS
2024 ICRBE EXPO |
What is a good grip overcoat epoxy to use
Posted by:
Glenn McMurrian
(---)
Date: June 14, 2020 03:09AM
Would Pro-Kote Standard build be a good choice for a long lasting durable epoxy overcoat for grips or would some other be better. Glenn McMurrian Re: What is a good grip overcoat epoxy to use
Posted by:
Tom Kirkman
(Moderator)
Date: June 14, 2020 09:35AM
Epoxy does not make the best top coating for grips. Some type of Urethane would be better choice. PermaGloss immediately comes to mind.
........... Re: What is a good grip overcoat epoxy to use
Posted by:
roger wilson
(---)
Date: June 14, 2020 09:40AM
Glenn,
What are the grips made from? Re: What is a good grip overcoat epoxy to use
Posted by:
Norman Miller
(---)
Date: June 14, 2020 09:41AM
I agree with Tom, I prefer Permagloss as a top coat. Extremely easy to apply and is very durable.
Norm Re: What is a good grip overcoat epoxy to use
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: June 14, 2020 01:28PM
Overcoating what surface? Re: What is a good grip overcoat epoxy to use
Posted by:
Glenn McMurrian
(---)
Date: June 14, 2020 01:36PM
It would be Fiber Carbon grips Glenn McMurrian Edited 1 time(s). Last edit at 06/14/2020 01:37PM by Glenn McMurrian. Re: What is a good grip overcoat epoxy to use
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: June 14, 2020 02:40PM
Some use wrap epoxy, I find it too soft and it will scuff. I use a 2 part epoxy from West System. Re: What is a good grip overcoat epoxy to use
Posted by:
Glenn McMurrian
(---)
Date: June 14, 2020 04:55PM
I asked a guy on youtube what hat he used and he said that he used ProKote but I do think that it would be too soft and scuff and dent and scratch I know that the old flex coat did. Glenn McMurrian Re: What is a good grip overcoat epoxy to use
Posted by:
Tom Kirkman
(Moderator)
Date: June 14, 2020 06:03PM
PermaGloss is outstanding on carbon skinned grips. Hard as nails, will never yellow, very difficult to scratch and yet thin and light.
Here is an easy way to do it: [www.youtube.com] ........... Re: What is a good grip overcoat epoxy to use
Posted by:
John DeMartini
(---)
Date: June 14, 2020 07:44PM
For an overcoat my choice is Permagloss U-40. After the u-40 is fully set I follow it up with a coat of premium wax.
The wax is not necessary but I use the wax because it tends to fill in voids and fine scratches and tries to form an even surface which makes it shinier. The wax makes the surface “slippery” and somewhat resistant to minor scuffs and rubs, also the wax makes it easier to clean the rod of fish slime, dirt or other contaminants. Re: What is a good grip overcoat epoxy to use
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: June 14, 2020 08:27PM
This thread makes my top 10 list. Re: What is a good grip overcoat epoxy to use
Posted by:
ron zimmerman
(---.tcso.qwest.net)
Date: June 15, 2020 03:10AM
I did it on a couple of cork grips and I used Thread Master lite . It seems to be holding up fine so far . I thought it would be slippery but that hasn't been the case . Re: What is a good grip overcoat epoxy to use
Posted by:
roger wilson
(---)
Date: June 15, 2020 08:35AM
With respect to cork grips:
Normally, cork grips really don't take a finish very well. The reason is that cork is a closed cell material that essentially does not absorb anything. You can apply a finish as you have done with the Thread master lite, and it will look fine. But, eventually, it will essentially all peel away simply because there is little to nothing for the finish to adhere. But, as long as it looks nice and does not get too heavy use, it will look great until it doesn't. But, other materials like wood and other similar materials that have a porous or a semi porous structure will take, absorb and will give a very long wearing finish indeed. Best wishes. Re: What is a good grip overcoat epoxy to use
Posted by:
Angelo Biviano
(---)
Date: June 15, 2020 10:54AM
Does anyone know what Scott rods uses on the first burl cork ring on some of its handles? I think the G series uses this. It looks like a continuation of the rod finish, but I can't tell if it's urethane or rod finish. It seems to yellow the burl cork ring just a bit. Thanks! Sorry, only registered users may post in this forum.
|