SPONSORS
2024 ICRBE EXPO |
Thread finish
Posted by:
John DeMartini
(---)
Date: June 10, 2020 06:38PM
Need advise.
I have been using Gene Bullard's Diamond Two (two part) thread finish and I have enough left for one or two more rods. I made some searches to get more and found a "D2" finish, is it the same as the original Bullard's? If not, is there a comparable brand. THANKS John Re: Thread finish
Posted by:
Tom Kirkman
(Moderator)
Date: June 10, 2020 08:33PM
The original Bullard Diamond II became defunct in the late 1980's. Not even the resurrected version from about 2010 was the same. The company that made that product for Gene folded in the 1990's. The newer version is from a different albeit major epoxy formulator.
............ Re: Thread finish
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: June 11, 2020 07:11PM
If your'e using D-2 your'e very likely using the same one being sold now. I use it and Threadmaster Lite. Will my next batch of Threadmaster be the same as sold in the past, (I hope so) or will the new owners try to "improve" it remains to be seen. Re: Thread finish
Posted by:
John DeMartini
(---)
Date: June 11, 2020 10:42PM
Thanks folks. It is the same.
John Sorry, only registered users may post in this forum.
|