SPONSORS
2024 ICRBE EXPO |
Dan Craft Green Rivers - Recommendations
Posted by:
Paul Kolis
(---)
Date: June 08, 2020 08:33AM
I built a Dan Craft Green Rivers 9'5 wt, truly love the rod.
Unfortunately, I cannot get a back up, since it appears Dan's shop is closed. Recommendations for a blank as similar to as possible Thank you, Paul Kolis Re: Dan Craft Green Rivers - Recommendations
Posted by:
Herb Ladenheim
(---.lightspeed.rcsntx.sbcglobal.net)
Date: June 08, 2020 12:22PM
Paul
Is the Green River a 3 or 4 piece blank? VERY dark green - bordering on Black? Nice medium action - Not nearly as fast as his FT? Herb Re: Dan Craft Green Rivers - Recommendations
Posted by:
Paul Kolis
(---.cluster-nyca.forcepoint.net)
Date: June 08, 2020 05:04PM
dark olive green, 4 piece. i would say it is as "fast" as his FT
Had an FT but it was mortally injured in a car door :( Green Rivers is quite similar Re: Dan Craft Green Rivers - Recommendations
Posted by:
Herb Ladenheim
(---.lightspeed.rcsntx.sbcglobal.net)
Date: June 08, 2020 07:01PM
O.K. - thought I had a #6 - but not as you describe.
Herb Re: Dan Craft Green Rivers - Recommendations
Posted by:
Herb Ladenheim
(---.lightspeed.rcsntx.sbcglobal.net)
Date: June 08, 2020 10:10PM
Paul,
The CTS Affinity-X #5 would be similar - BUT - a #5 FT would have to be overlined with a #7 line. So if your Green River is similar to the FT - did you have to overline it?? Herb Re: Dan Craft Green Rivers - Recommendations
Posted by:
Brian Gross
(50.226.78.---)
Date: June 09, 2020 03:06PM
I just talked with Dan I will see if he has any left for you. Re: Dan Craft Green Rivers - Recommendations
Posted by:
Paul Kolis
(---)
Date: June 10, 2020 12:09PM
Brian...Thank you so much ! Re: Dan Craft Green Rivers - Recommendations
Posted by:
Paul Kolis
(---)
Date: June 10, 2020 12:09PM
did not have to overline it, was a great performer Re: Dan Craft Green Rivers - Recommendations
Posted by:
Brian Gross
(50.226.78.---)
Date: June 12, 2020 01:36PM
Brian Gross Wrote:
------------------------------------------------------- > I just talked with Dan I will see if he has any > left for you. Yes he has them in stock, his new email is Craftydan1189@yahoo.com Sorry, only registered users may post in this forum.
|