I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
Cork Specialties LLC
CRB
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
REC Components
ReelSeatBlanks.com
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Pages: Previous12
Current Page: 2 of 2
Re: color preserver
Posted by: ben belote (---.zoominternet.net)
Date: May 24, 2020 06:38PM

Michael Sutheimer Wrote:
-------------------------------------------------------
> I used the current threadmaster chromoseal and
> had my problems.


ok, sounds like nothing has changed..thanks Michael..

Options: ReplyQuote
Re: color preserver
Posted by: Michael Danek (---.alma.mi.frontiernet.net)
Date: June 07, 2020 12:17PM

Well, like some of you, I've been stung. My latest build using the old bottle of Roddancer Chromaseal 2 caused my epoxy to be very lumpy ONLY in the areas where the CP was applied. In the areas that were not covered with CP, my epoxy is like glass. I don't recognize any differences of process from previous builds, but there must be something.

That bottle is going into the trash.

Options: ReplyQuote
Re: color preserver
Posted by: Todd Andrizzi (---.slkc.qwest.net)
Date: June 09, 2020 10:06AM

I decided to take a chance and bought some flex coat CP. I did the ferrule wrap with 2 coats and then finished it. It turned out real nice. The color changed just slightly but is still pretty bright and acceptable. I am using a bright red color thread and it went to a dark red but looks even better. I will see how the rest goes now. I have all the wraps done and with 2 coats of CP. Will finish them and let you know if I have an issue. Thanks for the comments!

Options: ReplyQuote
Pages: Previous12
Current Page: 2 of 2


Sorry, only registered users may post in this forum.
Webmaster