I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Fuji RV16-H for tuna jigging rod
Posted by: Chris Macropoulos (63.115.128.---)
Date: May 15, 2020 01:16PM

Whats your thoughts on using an RV16-H as a stripper guide on a spiral wrapped jigging rod. thinking about using RV16-H then MN10 the rest. reel would be accurate 500n. Blank is Thrasher trg60 100-250gr

Options: ReplyQuote
Re: Fuji RV16-H for tuna jigging rod
Posted by: Norman Miller (---)
Date: May 15, 2020 07:31PM

They also make a low frame LRV for conventional casting rods that could be used.
Norm

Options: ReplyQuote
Re: Fuji RV16-H for tuna jigging rod
Posted by: Mark Talmo (---)
Date: May 16, 2020 12:55AM

Chris,
I personally prefer the KWs over the MNs or LNs, even if the RV is 90* and the KWs are slanted. The KWs are just a great guide in every aspect. Hopefully Norman is still viewing your post and will afford his opinion. Maybe even Jim Isling will comment. I will continue viewing your post to learn from the veterans.

Mark Talmo
FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE.

Options: ReplyQuote
Re: Fuji RV16-H for tuna jigging rod
Posted by: Norman Miller (---)
Date: May 16, 2020 12:15PM

I don’t build rods for tuna jigging, so I don’t really know what guides are the best for such a rod. With that said, the RV16H is a KR spinning guide and might be a little too tall, which is the reason I suggested the possible use of the LRV guides which are designed for conventional rods. Still have the same look but a lower profile and if you want you could use them as a stripper and running guides. Not sure of their heights, because there may be a typo in the Anglers Resource catalog where the LRV 10 is listed as higher than the LRV 12 which makes no sense to me.
Norm

Options: ReplyQuote
Re: Fuji RV16-H for tuna jigging rod
Posted by: Bill Falconer (---.lightspeed.brhmal.sbcglobal.net)
Date: May 18, 2020 05:07PM

Chris -

Yes you can use that guide for that application. While it seems high, you need a high first guide to keep the line of the tip end of your fore grip under heavy load with a parabolic jigging rod. I actually have used and really like the CLCSG20 or BLCAG20...this is a low rider surf style guide you can reverse with the single foot facing the reel. This guide is even higher than the RV16-H. In my experience you need it. You can order these directly from Angler's Research if you have an account or find them on @#$%& (most normal Fuji dealers don't stock them).

Make sure you test your set up with the reel you will use with enough line off the reel to simulate the depth you will be jigging. Sometimes your set up is great with a full reel but line will hit your fore grip under heavy load at depth with 1/2 or 1/3 of the line out on that narrow spooled jigging reel. Hope this helps.

Bill

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster