SPONSORS
2024 ICRBE EXPO |
Metric system
Posted by:
Keith Langford
(---)
Date: April 29, 2020 06:35PM
I am brand new to the metric system, googled and I basically get it . I do have a question , if my rod layout calls for 91.5 cm that would be 91 cm and 5 mm correct. Keith Langford Re: Metric system
Posted by:
Tom Kirkman
(Moderator)
Date: April 29, 2020 06:59PM
The metric system is rather easy, in fact, the U.S. uses it for it's monetary system.
10mm = 1cm. So 91.5cm = 915mm. .5cm = 5mm. You are correct. ........... Re: Metric system
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: April 29, 2020 08:02PM
Keith, if you wish to convert the metric system to inches and feet, there are many conversion charts available online just Google it. Re: Metric system
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: April 29, 2020 08:11PM
Get a nice metric tape measure. You can get them at some hardware stores like northern tool. Makes laying a guide train much easier because you don't have to deal with fractions of inches. Once you start using it you will become a convert.
Norm Re: Metric system
Posted by:
Keith Langford
(---)
Date: April 29, 2020 08:36PM
I got one today Norman, per your recommendation. Pretty sure I got this down pat now, and you were right, much easier. 10 mm in a cm, 100 cm in a m. Got me a fatmax 8m/26' tape measure. Started framing houses when I was 19 so I am pretty good with a tape, just new to metric system but I got her know. Thank everyone for the replies. Norman would it be okay to email you about some questions I have. Re: Metric system
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: April 29, 2020 08:38PM
Sure,
Norm Re: Metric system
Posted by:
Spencer Phipps
(---)
Date: April 29, 2020 09:20PM
We were supposed to be fully converted to the metric system by 1991, I even taught a class in it's use in the late 70's, early 80's. Things are so much easier when you use that system. Everything is based on he earth's natural known, and repeatable values. Re: Metric system
Posted by:
Mark Talmo
(---)
Date: April 30, 2020 01:16AM
The metric system is emphatically easier than the U.S. jumble of odd measurements for weight, length and volume; 16oz = 1lb, 12in = 1ft, 3ft = 1yard, and my favorite, 5280ft = 1 mile; now there is a nice, round number!!! The metric system employs the simplicity of a “base-10” to all measurements whether weight, length or volume. In the U.S. we have different “bases” for weight, length and volume which is certainly confusing to say the least. In the U.S. a great priority is money! Our monetary system is “base 10” so why not everything else? It just does not make logical sense to confuse everyone by including a “base 12”, a “base 16 and “base 5280” into otherwise simple life!!! There was a huge push in the U.S. 1980s to convert to the metric system with dismal results. Many do not realize their new American built Ford, Chevy and Dodge now incorporate metric bolts and fasteners throughout. All said, I am admittedly old-school and am more comfortable measuring in .001in than .010mm while machining, but the metric system is superior in ease and execution, hands down, across the board. Converting is not as easy as those unrelated might think; it is NOT simply changing rulers!!! Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Re: Metric system
Posted by:
roger wilson
(---)
Date: April 30, 2020 03:17AM
The USA was virtually converted to the Metric system some years ago. Already a significant portion of the US highway signage had been converted, and other industries were well on their way to the conversion.
Also: [www.cnbc.com] It is so unfortunate, because as others have said, the metric system is so so so convenient. Just take a number and add or subtract 0s for any conversion. No fractions to ever deal with. About 90% of the rest of the world has converted to the Metric system so we should get together to try again to get the conversion completed. Best wishes. Re: Metric system
Posted by:
Tom Kirkman
(Moderator)
Date: April 30, 2020 08:13AM
The greatest impediment in implementing the metric system was that everyone wanted to simply convert it to what we already had instead of simply learning the relative lengths, weights, distances, etc. of the Metric system. Sort of like learning a foreign language - those who do it best also learn to think in the new language instead of just translating things in their head.
.............. Re: Metric system
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: April 30, 2020 06:04PM
The above being said, I find it curious that while the old Fuji GPS provides a conversion feature the newer KR GPS does not. That was a handy item. Re: Metric system
Posted by:
David Boyle
(---.rcmdva.fios.verizon.net)
Date: May 02, 2020 09:35PM
I grew up with the metric system and am now trying to get my head around US weights, measures and distances and it is not easy, lol Re: Metric system
Posted by:
Brian Babcock
(---.va.shawcable.net)
Date: May 03, 2020 02:07PM
As a 55 year old Canadian, I lived through our conversion back when I was in elementary school. All those years later, I still watch my weight in pounds, my height in feet / inches, my fuel economy in miles per gallon, and my football in yards (yes, even Canadian Football). My guide layouts are in inches, fly rods are in feet,fly lines measured in grains, and downrigger cannonballs in pounds. Red wine, however, is in milliliters! Unless it's just 1 glass - then ounces....... Re: Metric system
Posted by:
ben belote
(---.zoominternet.net)
Date: May 03, 2020 07:47PM
that,s funny Brian and that,s in Ha, Haaas.. Sorry, only registered users may post in this forum.
|