I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
Cork Specialties LLC
CRB
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
REC Components
ReelSeatBlanks.com
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

American made?
Posted by: Phil Ewanicki (---.res.spectrum.com)
Date: April 26, 2020 09:16AM

About what percentage of rod blanks sold in the U.S.A. were made in the U.S.A. - if anyone is keeping track? Is there any U.S. maker of what I believe is called pre-peg: the cloth that is used to make blanks?

Options: ReplyQuote
Re: American made?
Posted by: Spencer Phipps (---)
Date: April 26, 2020 01:19PM

NFC is, they will tell you where they just look at their videos and Facebook/blog pages.

Options: ReplyQuote
Re: American made?
Posted by: Mark Talmo (---)
Date: April 26, 2020 03:02PM

Phil,
In my structural composite hay-day, there were a number of U.S. CF, FG and aramid weavers, some of which produced pre-preg as well. Hexcel was the dominate one in the U.S. and probably still is. Over the past 15 years or so, the Japanese company, Toray, has become a world-wide respected manufacturer of CF, possibly more dominate than Hexcel.
Soller Composites used to be a weaver and Jon Soller has expressed interest in taking it up again. He has been in the composite industry for quite some time and would be a valuable source to answer your question more thoroughly. Give him a call.

Mark Talmo
FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!!

Options: ReplyQuote
Re: American made?
Posted by: Lance Schreckenbach (---.lightspeed.hstntx.sbcglobal.net)
Date: April 27, 2020 01:53PM

Most, if not all have ties to foreign manufacturing, so made in America usually means assembled in America. There is usually a pretty good chance that the epoxy resins in the prepreg are made solely in America.

Options: ReplyQuote
Re: American made?
Posted by: Phil Ewanicki (---.res.spectrum.com)
Date: April 27, 2020 02:02PM

Thanks, Mark. In the absence of any factual information about rod blanks - "fast" "tough" "soulful" "smooth" "responsive" "light" "sensitive" "powerful" etc. are NOT physical properties - it's tough to find the "best" rod blank - the one you or your customer wants - assuming your goal is to catch fish rather than impress onlookers.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster